Viewing all customer Discussions for:

S795-26 26" Series 795 Channel Balance

Good Afternoon, This would be the entire channel along with the T-Lock balance shoe. I am hoping to purchase four of them. Please see the pictures attached or what the channel balances will look like. Thank you very much!

Hi I have two windows I'm trying to repair that have these slide rails in them with the same tilt thingy at the bottom. I'm not sure what these translate to. I would need 4 rails and shoes for the taller windows and a pair for the smaller window. Thanks!

The silver rod is 25 1/4 inches, the spring is 13 3/4 from the very bottom of the hook to the very top. This comes from a single hung window where the bottom window opens and tilts in. The upper windown doesn't move.

Need replacement pivot lock shoes. These connect to an inverted block and tackle balance. Balance has the following markings "BSI" and "26B".

Front and back photos of the existing shoeAt the base it measures 1.25”The channel balance is 3/8”Can you also id and quote the channelBalance?26”. 3/8” w. Sash weight 20lbs (stamped 26B)I didn’t notice the exact hook on website. Mine is a hook that simply hooks into a ... (cont.)

Hi - i think i need new channel balances (they keep shooting up). Can you confirm the right replacement based on the photos?

I am looking for a replacement window balance. I have attached photos of the hook, shoe and part ID (BSI 26D). Channel is 1/2" x 1/2". Shoe size is 1-1/4" wide X 17/32" thick. Spring is attached to the shoe end. Let me know if there is more info or photos that you need to identify the appropria ... (cont.)

Hello Swisco,I am writing to request assistance with an Atrium single-hung window. The slide pieces on both sides are broken, and because the window spring assembly is no longer attached to these pieces, the window will not stay open.The spring assembly is stamped with part number 26C-BSTN (or possi ... (cont.)

Hi I am looking to get a replacement valance for my jeld wen tilt windows. They have the rope hook attachment and also have the 1 inch green t lock balance closed cam. I believe your 795 series is what I need but with the smaller cam and rope hook. The stamp on the valances is 24B and 26 B. Is it po ... (cont.)

Not seeing the “end “that connects to the window frame listed in the website.

27.5 inches long

I believe I need 26" Series 795 Channel BUT mine has a hook

I have 2 windows that the left side balancer when looking from inside home to the outside of home is broke. Along with 1 latch that was damaged due to the balancer failing. Would need 4 new balancers 2 for each window. Along with 1 latch for the broken broken latch on window in picture ... (cont.)

Parts

looking to replace several of these and want to make sure I have the right one. Thank you for your help

Hi I need assistance with ID of t lock for my window. I ordered the wrong ones. Thx

I have previously ordered this channel with the eye in the hook. I now need two as shown in the picture with a hook to latch into a hole in the window frame.

lenght 26 inc

The plastic connection from the cord to the spring w/i the channel broke. Google tells me the NL BS1 marking is not for tilting windows. What I should order?

The Sash Carrier Assembly was broken, and the metal part dropped down. I suggest it is similar to on lower sash.