Viewing all customer Discussions for:

S795-26 26" Series 795 Channel Balance

Need help to close my double hung window - I need to ensure I order the right parts, on the balance it says 26b 1" balance shoe

I am in need of these 26" replacement balances. Let me know if more pictures are needed. Also could you help identify which Window Manufacturers used this hardware? Thank You, Don

Hi, One of my Republic Window Tilt-in Balance broke and I'm trying to find a similar replacement. I know the company no longer exist and windows were installed by the builder 16 plus years ago when the house was built. I found something similar on the Swisco site, but the Swisco model I saw, the ... (cont.)

I need 14 Series 795 26B with 15-195 T lock and 15-198 Clip attachmentJohn

I do not have much window knowledge. The plastic pulley broke on one window balance and I do not know enough to pick the correct replacement. The hook goes into window frame near the top. This is for the bottom sash of double hung tilt windows. The only stamp I have seen is pictured above- BSI 26C. ... (cont.)

looking to replace these. Will need 6 to eight of these. Believe to be series 795, but concerned of beveled portion near bottom maybe not 795.

Single hung window with bottom tilt capability part # on channel balance is 26B , 5/8in wide , 1/2in deep

Need help Tilted window replacement part. The tag on the window says. MST 3856 Took the part out of the window and it reads 26DThank you

As you can see the plastic pieces are broke. I cannot see any ID numbers on them. The only reference I can find is on the metal track that says 26 1 BSI

Have two windows where the cord broke on the left side balancers. Looking to get replacements for the windows. 26C is stamped on the bar, and the cord is attached to a small metal clip at the top of the sash. The clip screws into the sash.

Hi, I didn't see anything on your site resembling the end of this MW balance I tried to show that one of the two tabs is broken. Not sure if I can replace the tabs or if I order the entire mechanism.

marked 26C. There is a groove that leads down into the cam. Milgard vinyl window. I'm pretty sure it's your 795 series, but I am not sure which cam I need. Thanks!

5737877-795l need 2 window balance

"27E BSI FA" etched on back. I ordered a part that I was told was the same, but the shoe and the clip on top are very different and don't fit my window. What part do I actually need?

I have several windows where the plastic piece broke. I need to replace the whole spring unit. Where can I find this? I am having problems. Thanks Marsha

Hello, I seem to be having a issue trying to match up the parts I need . this balance is 26" long (metal channel only).The channel is 9/16 wide . The channel is 1/2" deep ( all I see on line are 5/8"deep ??? ). please let me know what part number I need to order for the balance and if I need to ord ... (cont.)

Hello,I would like 2 replacements for the Window Channel Balance shown in the photo. Identifying marks are "26B" and "BSI". Channel dimensions are about 1/2"x1/2"(may be 9/16"x1/2") They are for a tilt-out window.Many thanks

Window is a double hung window that tilts out. Not sure of the brand of window. Metal part is 26" long and has 26B ok BSI stamped on it.

26B RA BS1.

Hi I'm looking for a window balance like the o e in the picture or replacement .the window factory is : cornerstone/heritage. Single hung. NFRC-HGB-K-15. THANKS