Viewing all customer Discussions for:

S795-26 26" Series 795 Channel Balance

Hello, My name is Jennifer. I work for City glass OKC and am needing help finding this part for a window we installed. I ordered something similar recently from you, it was a 25c, but it was not the correct one. I would greatly appreciate any help you can offer.

I bought the 26" SERIES 795 CHANNEL BALANCE but it didn't come with any hardware to install. The balances I'm replacing didn't use screws, they hooked into the holes on the top sides of the channel. What side screws should I use to install these balances?

I need help finding this specific type of window balancer.

I have original windows in our home built in 2008 that appear to be Millgard, however all the Millgard balances I find online look different than these and don't seem to have a pivot shoe. In a few of the windows in our house the pivot shoes seem to have warn and come out of the balance. I did l ... (cont.)

I need help with these parts. Window Stop Window Guide Balance with gray connector at bottom. Thank you for the help!

Hello, I need 2 window balance replacements. The rod has 26 B stamped on it and the clip at the bottom, which is broken, has multiple patents stamped on it.

Looking to order (2) S795-26 with a 26B stamp and 15-198 hook.

We have Pella ThermoStar Windows. The channels are failing at an alarming rate. They are vintage 2008. The channels have the hook at the top and have 26C stamped in them. Other question is how to we remove the sash lock?? Any help is greatly appreciated!

I wanted to know if you carried any window balances with a clip. The measurement is 32". The ones on the website should a screw-in option but won't work with the hole I have in the window.Thank you for your time. Natasha

Hello...I need replacement window tilt sash channel balances 25 3 GX CMC 4 H. Thank you for help to find proper replacements for the original balances.

Hi, I am looking for a few sets of channel balances for our Pella windows. The shoes that the terminal pins lock into break away from the metal channel. They measure 26" without the hook or shoe.

I need 3 pair of the inverted channel balances with the T shoe. stamped on it was "26-5 TD BSIN". I also need 2 pair of the plastic snaps. they measure 5/8ths wide and 2 3/8ths long. please let me know if you need anything else and also how to order. thanks joe

Here are pics of what I have - one is missing the white plastic part that holds the piece in the window channel. I would just like to replace both so they match - what do I need? The engraving shows 26C BS1. Thank you so much!

I need 2 balances - part number S795-26 ... option 26c with a clip 15-198 attached.

I spoke with Swisco and they told me based off the information I gave them that I would need custom channel balances. So I have attached photo's and info regarding the busted channel balance. -I need two channel balances -I have identified the pivot shoe as the 15-216 from your web site -I have id ... (cont.)

Pella Tilt-Window, I need 2 complete Channel balances, marking is "26C". There is a hook on the top that attaches to the window frame interior. Bottom is a 1" wide Pivot Lock Shoe (closed back - green insert). Channel is 9/16" x 9/16".I also need 2 additional 1" Pivot Lock Shoes (closed back-gree ... (cont.)

I am looking to order (2) of the 26" series 795 channel balance with a 15-198 balance clip installed my numbers on my original part is 26c BSI.

It's for tilt windows, I see markings of 26-5, TB and BSIN. These balancers have 3 solid sides with a spring on the open side. Cord screws in on top and these go inside the channel....I am unsure of the ends of balancer, I see a plastic piece that is in the window channel and sent you a picture. T ... (cont.)

Grey pivot part on left side damaged. Bar in good condition. Other pic is window information need to know if Grey pivot part able to get . if enough info

I'm trying to find the correct channel balance replacement for 2007 Silverline windows. The stamp on the current channel balance says 26-3 TE BSIN (see picture). Does the "TE" mean that the replacement balance would have an "E" sash weight between 26-30 lbs.?