Viewing all customer Discussions for:

S795-26 26" Series 795 Channel Balance

Can you please help with a replacement for this balance?

The widows that were install when I purchased our home were Twinseal by MW Vinyl.I'm looking to replace T-Lock Balance shoe on both sides of the sash. Channel balance markings are 26C BS1N their is a hook on top end that connects to the window frame. The overall length is 28 inches. Window sash wt. ... (cont.)

Hi, I have single hung windows.Series 3000 SHAAMA/NWWDA101/I.S 2-9H-R25-46X68 I need balances and clips.The sash weights 18 lbs, and balance length is 26.5 inches. I believe I've pick the correct ones, but wood appreciate your help.Thanks, Larry

Need 26C Series Channel Balance with Balance Clip Attachment and 15-194 Balance Shoe. Have 14 year old Jeld Wen vinyl windows with round hole. Need 4 of these assemblies and would you be able to provide these. Thank you

Hello !! I have been looking at your videos for a substitute, but due to the shoe size limitations on newer balance models, I decided to write you for your opinion. I currently have three windows in my apartment, but this building has over 60 apartments with the same problem. Each apartment has 8 wi ... (cont.)

I think it is broken, Let me know if that is correct. Numbers are 26B RH BSI, Need to know what is the replacement item.

Need 4 Chanel balance fo lit windo

26B CJ BSI AP

Good morning, I am trying to find replacement balancers for these stanek windows. If possible the other parts as well. Thank you! Jim

The stamp on my window balance is 26-5. Can I order S795-26 for replacing? Which option should be (A.B.C.D.E.F.G)? S795-26 already included a 15-194 T-lock balance shoe, close cam and balance clip attachment in when ordered S795-26, right? Thank you.

here is a picture of the original channel balance. You will have to enlarge it. The top channel balances are labeled 28-c. The bottoms are 26c. The hook has to fit into a hole in the trim behind The channel balance. inside a small hole in the trim.

I am needing to find a replacement for this. It is a 26'' window balance. The ones I previously ordered had the wrong size end. It was too large.

Hi, I believe you have replacement parts for this old block and tackle balance. This is a single hung window, about 39" x 29" The metal clips at the bottom of the window are 2 1/2 " long. One has a 4 on it and one has a 5 on it.The rod unit is over all 27" long.The black piece at the bottom of the r ... (cont.)

I am not sure what cam lock end I need

26D on the rod. Additional numbers in the photo is on the window frame. These are tilt in windows.

I need several channel Balances. I do not see any with the hook type like I have. Would you be able to help me figure out what part I will need. The only number stamped are "26B BS1". I have 11 windows needing repaired. Thank you for your help!

Plygem windows are six years old?installed by a modular company. The tiny hook at the top that connects to the window frame snapped in half. The pictures indicate the only information I have on the windows, the hole where the clip goes, and what the part looks like. If replacement hooks are availabl ... (cont.)

I need tilt out balances. These are marked 26CBSItl. They are 26" and very similar to your s795 but it has a 1" cam similar to your 15-194. I need 4 of these balances.

BSI 26C are the only numbers and not sure what brand of window.

Need Balance part at base of balance for Pella Single Hung Window. Balance is stamped 26C BS1 26 inch balance length