Viewing all customer Discussions for:

S170-405 405 Series 170 Coiled Balance Spring

I just sent a question on me ordering the wrong part. I looked everywhere and couldn't find what I thought was the right part. The number on the coil is 10JS. I hope this will help in getting the right parts. Thanks again

Looking for 2 coil balance springs. The strap is about 3/4" wide. The only markings I found was "4075" near end of strap. Window manufacturers unknown, installer out of business.

The S170-409 is the closest part I could find on your website. The photo and dimensions match perfectly, however, my springs are stamped 410 vs 409. Actually they are stamped 410 and SK underneath that number. If the 410 is not available perhaps the 409 would work. Thank you

Hi I'm looking for S170-403 but I can't find it. Is S170-405 okay to replace 403? Please let me know. Thank you.

I think I need coil balance 171 and 170 double coil and the pivot shoe 15-192. The number stamped on the coil is 405 (on the top coil) and SA334 on the bottom coil. I am sending this picture to verify and then order as needed. Now that I have the window apart, I will need to replace the other sid ... (cont.)

Need parts pictured above

I need both sides for 3 windows. Is there a top and bottom for one side? Thanks

We are trying to identify the proper springs for replacement in Certainteed tilt windows circa 2000. The sash weight is approximately 20 lbs and the original springs have the number 10 stamped on them. Please get back to us with any information you have. Thank you,Jim

Hi I'm searching for a a coil balance it has the number 10j stamped on the coil

Need 2 pivot shoes and coil springs I think 15-192 for the shoes not sure about the springs Thanks

Good afternoon Try to replace the 2 window balancers shown in the photo.. Window in question is 24"x 33".. I cant seem to find any numbers on the coils themselves. Any way you can point me in the right direction?? Thanks

It's for a Certainteed Window The Pringle's shoe does have any visible numbers on it but it is pictured. The Spring corner says H8637MXX, the roller or retainer behind it say H8638MXX. The spring coil has the #500 printed on it. It a good size window bottom sash is 35 7/8 x 32 1/16. Another question ... (cont.)

Called and spoke to Mike earlier on the balance coils (both sides)for a Simonton 5000 series Vinyl window. I have some pics attached part number on the coil is 4055 most likely no help. If these are not good enough let me know what you need to see. Thanks, TomR

Here is a picture of my coil spring balance on my window. It is a single coil that is 3/4 inch wide. The only number marked on it is 10. Would this indicate a 10 lb spring? Since it is only a single coil would I need a short coil? Also, this is for a single hung window. Any other information t ... (cont.)

Both coil balance springs broke on a Certainteed double hung window. The only number I see stamped on the coil is 10. Is there a Model S170-410? or will a S170-409 be compatible. GM

Hi. I inherited 2004 replacement windows when I bought my house. Some of the windows will no longer stay open on their own because their pulleys are broken in one way or another. I'm hoping to replace the pulley systems in those windows, but don't have part numbers. Attached is a pic of one of t ... (cont.)

The pivot bar is 2 and 5/8 long. 1/4 wide Coil balance spring is 2 1/2 long 7/8 wide I need one pivot bar 3 left coil balance spring 1 right coil balance Springs

Several windows in "new to me" house have windows that do not stay open. It appears the coils could just be replaced, but if it is better to replace all these parts that may make sense. no markings on windows to indicate brand.

Hi, We need to replace 2 broken coils (both sides) in our Certainteed double hung window. The parts numbers for the 3 pieces: A186160 (spring holder) 86180/90 (bracket) 86170 (roller) Do you sell them? Thanks! Chris

I have certain teed single hung Windows. Each side take two coil springs 405J. What is the difference between the 171-405 and 170-405?