Viewing all customer Discussions for:

S190-640 640 S190 Coil Balance Spring

Hey, have several windows that have just one side where the coil balance snapped. I don't know if the top plastic and bottom piece come with a new coil bablance, or if you just order the coils. Can you direct? The house was built in 2001. The (2) pics enclosed are of the top and bottom of a side tha ... (cont.)

They are from a 2003 MI Home/Xact window 35" w by 35 1/4" h. the broken coil springs are 1/2" wide. My guess is part number 740 S190 but wanted your opinion. Thanks!

640 is on end of one coil spring. I will need both sides.

I am looking at replacing the balance & sash locks for the double-hung window. The label on the window states H-LC35-46x77. Can you please suggest the part, so that I can purchase from your site. Also if you could please confirm if the parts are returnable/replaceable if it does not fit. ... (cont.)

Attached pix show a window that will not stay up. Its partner window works fine. I would like to know if you can match the spring cartridges from the pix. There are no markings or brand names visible anywhere. These windows are original construction from around 2004. I would need two spring units, o ... (cont.)

Needed some pricing for the pictured pwindow parts. Looking for 20 of each or wherever I may get a better price.

Looking for replacement parts for a single hung Capitol window. About 21 years old and springs are breaking. Not sure of the weight or model.

Need 2 of these for a vinyl window. 11 lb window. 2 balances Thank you

the only marking is a 5 on the top coil and a 6 on the bottom coil. 12 of these need to be replaced in 6 windows. Do you have the assembled unit available? The window weight is 20lbs, the window length is 29". Coil thickness is 0.510". The overall length of the plastic piece with the 2 mounting h ... (cont.)

I need 2 replacement window coil balances for an Anderson window installed in 1987 or 1988. The sash weighs 8 pounds. The only marking I could see is CO on the round metal pieces. The round metal pieces measure 1/2 inch in width. I don't need the 2 plastic pieces with the 2 holes with 2 screws. They ... (cont.)

Both of the coils broke on my window. I have attached photos. The coil photo shows a 9 or a 6 ???. The size is 18" x 29". It weighs approx 12 lbs. I need replacement coils for both sides.It looks like it would be possible to put 2 coils on each side but there was only 1 on each side. Please tel ... (cont.)

The sashes for these balances are 24lbs 2oz. I would need 2 of them. I assume the sashes these would go to are around 20 to 25 lbs? I would need 2 complete assemblies

I spoke with someone and they didn't seem to recommend what I truly needed please help

I would like to order some new springs but could not find a stamp on my original coils. I also need some of the Pivot bushing that the widow clips goes in (picture labeled 3)

Dear Sir or Madam, some of my frinds window balancers are broken. Could you please help to identify which replacement balancer works? The size looks like 9/16 x 1 1/4. On the coils, one is marked "5", the other "6". The weight of the window is 20 - 23 pound. The height is 36 ". Thanks, Andreas ... (cont.)

There are absolutely no markings anywhere unfortunately. These windows are original and the house was built in 2001 by Maronda Homes in Carnegie, PA (Carnegie Highlands). The window weighs 25lb and I was told that one coil isn't recommended for a window this heavy but it works for the remainder of t ... (cont.)

Hi,I'm not sure if that's the correct name of this, and I do realize that the parts are still in the window frame- think it's a vinyl window- but can this be replaced? If so, what would I need to purchase to replace the broken one, how would I identify the part?Please help me, as this is in my basem ... (cont.)

Hello, I am looking for the window coil balance in the photos. The only information about the windows I can find is that of the Quality Control & Testing AAMA Certification Program, Series: 3500, AAMA/NWWDA 101/I.S. 2-97, H-R20-48x78 H-R35*-36x66. And warranty information: MI Windows & Doors 1 ... (cont.)

Hi there, could you please help me figure out what's the replacement part for my 20X31" (13 lbs) Both sides are broken, and I need to replace them. Thanks, Pablo Ps. I added a quarter coin for size reference.

Thank you for this service! Home built in 1978. Two windows do not stay open and I believe it is due to snapped ribbons. One window measures 29.5 in x 20 in. The other is 21.5 in x 17.5 in. Attached coil system photos are from the smaller window. I can not locate any markings on the windows or frame ... (cont.)