Viewing all customer Discussions for:

15-192 CertainTeed Pivot Shoe

Window is approx. 46"X 46" inches part # on ballast is 3610 can't tell if it short tongue or long tongue? Do you carry this type?

Where can I find a window coil system replacement? The serial/product number is shown on the attached picture. You can see that the plastic portion broke right at the screw. The window is about 10 years old. Thank you, Chris

We have this from a 2 piece cam shoe for a Sears window. We need 4 of them.

Need: 2 - springs Number on part and photo 1. SA336 2 - springs Number on part and photo 2. LA406 2 - glides springs attach to. Number on part photo 3 A1-87558

These are for vista windows do you have anything that will work for replacement

I ordered the CertainTeed pivot shoe to replace my broken shoes but they are not the right part and don't fit into my windows. The picture are of the broken parts needing to be replaced. The Spring and covers all seem good but the pivot shoes have all broken in half. What is the appropriate replace ... (cont.)

I am looking for pivot shoes for my windows. I purchased the CertainTeed Pivot Shoe P/N: 15-192. It looked the most similar to what I had originally. It fits in my windows track if I shave off all the small plastic bracing pieces. Also my original window pivot bars have trouble fitting through the p ... (cont.)

photo 1711 these are not the correct part had to modify them and they still barley hold the window.the top and bottom windows will not stay in position.these were ordered from homedepot in 2005 im told 6500-6100 seriesdo you have replacement parts?thanks for your help steve

Good Morning Team , I'm looking to get some replacement part for my CERTAINTEED Windows. I have looked on your WEBSITE and can't find the same Part Numbers that are on the Original pieces . I'm sending a picture with the numbers on the parts so maybe that will help you find the right replacement I n ... (cont.)

Hi, I have a Certainteed window and the bottom sash won't stay raised. It appears I need to change the window coil balances. Can you tell from the photos what parts I need?

Can you tell me which pivot I need to order to replace this broken piece. I included the bar code that I found on the side of the window.

I need to replace, for a customer, a pair of Certainteed coil balances. the part number on the roller (Drum?) is 86170. The coil is 1 1/16" dia. and has 5-6 winds. the coil also has no holesbut one end has a half width cut away by 1/4" with the remaining half having a half circle profile. I'm af ... (cont.)

The pivot shoe on my window broke and I matched that up to a 15-192. The pivot bar also broke, but I don't see one on the website. Here is a picture of my old pivot bar. Do you guys have anything comparable or that will work with the new pivot shoe. Please let me know, thanks.

I have already received parts for my smaller windows from SWISCO, they used an 8.5 lb spring. THis window is much larger and the original manufacture used 3 springs in tandum as you can see, All the other parts are the same, so do I just use a stronger spring for use with this window or do i need a ... (cont.)

Hi: I have a single hung CertainTeed Vinyl window. The left side counterbalance spring seems to have broken so the window won't stay up in intermediate positions. I took it off and you can see the one spring is attached to the shoe but the other spring seems to have broken where it would attach t ... (cont.)

Here is the picture

Hello, here is a picture of the current coil balance from my vinyl replacement window. I don't see any markings on the balance. However, if you think there may be some in an inconspicuous place, please let me know. Any help you can provide to identify this for me would be much appreciated. Thank you ... (cont.)

I order the replacement pivot shoe 15-192 which is the exact replacement. However I had to modify this part to fit in the channel. All the raised ribs on the front and back I had to grind down smooth for this to fit the channel. Is there a different part number with smooth front and back? Also had ... (cont.)

Hello 'Swisco' You all do a great job with these parts!! I have used you once or twice in the past and look forward to a solution to this issue. Attached are photos from a customers window. He said he thinks Home Depot installed in 2007, as the date on the sticker shows. So, I think they are 6500 s ... (cont.)

My window won't stay up and I think I need to replace these small plastic parts and the box thing that they go into. One of the small plastic pieces broke and left part of it in the box and won't come out. The other box has a plastic piece that didn't break but is still stuck in there. Both also h ... (cont.)