Viewing all customer Discussions for:

15-192 CertainTeed Pivot Shoe

The cam on the white metal recoil spring I don't know if I can replace just the white metal or if I have to do the whole unit but I did buy the L piece for the window that goes into that on another window

I need the part number so I can order a replacement. Thanks

I have enclosed photos. One for each side of window both broken. I hope you can help me find these parts.

I am looking to replace the coil for my window. I have attached a photo of the stamp. Is that the same as your S170-408 Series? Thank you in advance Mark

I am lookin for both window pivot pins, pivot latches inner c shaped pieces and the inner assist Springs.

The part that allows the window to move up and down on a spring is broken

Good morning. I'm trying to locate balance replacements for Simonton windows that are out of warranty. Several have cracked in the same location. There are no markings anywhere on the balance themselves. Therefore, I'm only able to provide pictures. I have a total of eight balances that have snapped ... (cont.)

Hello thanks for any help you can provide. I need two replacement springs for my windows. Unfortunately, there are no markings on these parts. The sash of my window is about 1.5' wide and 2.5' high. Let me know if i can provide any other info!

Need the coil support cover. I have included a picture with the coil balance itself.ThanksKenny

I'm trying to find window pivot shoe locks, I previously order the S140-10 hoping they would work, but the they were too small. I've uploaded photos of one of my old broken pivots. I measured the width of my old pivot lock and it was 7/8 inches. The spring had "406" stamped on it, not sure if that m ... (cont.)

I need to replace a pair of this balancer shoe.

I have a Panorama double hung model 080-153. I need a pivot bar and pivot shoe. Do you have them? Thanks

I am looking for replacement parts on a Simonton window. These are a double hung windows. I believe they called them balance shoes.Looking for 6 replacements

10 LB SERIES 140 QUICK-TILT, SINGLE Product Code: S140-10 Is this the correct replacement part for the attached photo?

I didn't see these on your website. Hoping you can identify them. The windows no longer stay open when these pop out of their location in the window jam/spring area.Thanks,Mike

Need 4 stops 4 Shoes (width= 1-1/4) Thick(13/16) - Ht( 1-1/2) 4 Pegs/posts Shoe has a Number 1 stamped on it Pivot is 7/8"(oval widest) x 3/4"

Certainteed Coil Spring Pivot Lock Shoe 1 1/16" X 1" New Style 96-C1 × 2 Simonton 3 Hole Pivot Bar 3 9/32" Die Cast 85-5003 × 2

Windows are 10 years old

do they fit most brands of vinyl replacement windows? M existing shoe lock is 1 1/4" x 7/8". Please advise

I have DH windows from Simington. They are from 1996 only one has failed glass seal however 80% of all windows have busted shoes and pins. I need a solution for the old style plastic shoes that have split and the pot metal pins that break off at the screw hole, continuously. I understand from past p ... (cont.)