Viewing all customer Discussions for:

S160-09 9 lbs Series 160 Coil Balance

Can you identify and provide availability of this part off of a Plygem window?

The existing and missing is .5" x 1.25". on all windows, which are from the same batch. So the base shoes, base pins are the same. I have 2 lower sashes, 15 lb each. Can I get coils (4), base shoe (4), coil covers (4), pins (4) I have one lower sash, 18 lb. Could I get coils (2), base pins (2), ... (cont.)

I have an American Craftsman series 70. Size52x37. I need a balance coil for the left side (looking out). the coil is supported by part # 801020. Not sure what the lb. coil it takes. Will it be OK to replace just the one side? Thank you for any assistance.

The part is a Force balance from a Milgard Tuscany 8225T double hung window. The spring has an number: 5232208 with the number 35 above it. Both balances seem to be broken.

Hi,I am uploading some pictures for the broken spiral balance spring for my single hung windows which is from MI Windows and Doors. You can see that the left side of spiral balance was broken while the right side of spiral balance is working fine. But it won't hold off the window. The last picture i ... (cont.)

Dear Swisco, I am looking to replace my broken coil balance springs, numbers on my spring are, 9.0 , 35" , 5232208 Looking at your website it appears that I would need part# S-160-9 On my coil support there are stamping numbers , 5.232.208 & 5.365.638 , would part# 15-150S work? Pivot shoes loo ... (cont.)

#9 35" 93032

Dear Swisco,I'm replacing the coil balance in a Milguard Ultra fiberglass window (model 3285U - circa 2013). The coil is 1/2 wide and appears to be 35" long, based on the printing on the coil. The printing reads as follows: 9.0 35" 10 Oct 13Can you tell me what replacement part to order? Thanks ... (cont.)

I need some help identifying which type if coil I need, to replace both of my broken coils. I think that Series 165 3 lbs is what I need, but wanted to double check. Markings: 35" P 5232208 #3.0

It appears that 3 out of 4 coils have broken in this set of two counterbalances. Sash weight is approximately 15-20 pounds (Guessing?) Windows may have been from any source even though it is suspected they were part of the pre-constructed Alouette home kit built in 2000.Thanks,Bill ... (cont.)

We would like to order a pair of window coil balances for the bottom sash- including the pivot chute, coil and support. The thickness of the pivot chute is 1/2". The bottom window sash size is 30 1/2" wide x 29" high. The pivot and chute fits pretty snugly in the frame chanel and we cut away the v ... (cont.)

Do you have any videos about how to attach these two items? Ronald

9lb 35" length coil spring, 1/2" wide Looking for all of the parts shown in the photos to perform repairs. I am having trouble finding the plastic parts

I had the upper sash on a window slam shut one morning by itself. I'm thinking of ordering a 9 lb. series 160 coil balance, 15=191 pivot shoe, and a 15=1505 coil support. Does this sound like the correct parts compared to the photos? I think just the pivot shoes are bad because the coil and coil sup ... (cont.)

Hello, I have Amcraft Grand Estate windows and one Of the coil balance springs has broken. I need To replace the spring, shoe, and spring cover. #90 35 is stamped on the spring. 801020 is on the cover. There are no markings on the shoe.

Hello - We have a 24 year old home with Simonton, Dimension I Windows. We have a number of broken coil balances and tilt latches that I need to replace. I'm sending pictures of the Coil Balances (originally located high in the window frame) as well as a replacement set that was done under warranty ( ... (cont.)

I'm trying to order a new coil balance. I know I need a triple coil but I don't know how to figure out what lb I need. How can I figure that out? Thank you.

Photo attached of the shoe and metal band attached to it that either broke or snapped out of place. Need to either get the part and replace or tutorial on how to fix without new part if possible. Thank you. Mary

I recently purchased an S140-18 Quick-Tilt, Dual Balance... My window is 27lbs.

Hello,I need to replace these parts on my window.Please see attached photos and help me identify the part.There are 3 sets of numbers on one of the parts.PATENT #'S5.232.2085.365.6386.584.644 B2thanksMaria