Viewing all customer Discussions for:

15-198 Balance Clip Attachment

Img_7386: is the whole channel balance img_7383 & img_7380: is the end of it img_7385: is the top only writing on the metal part is 30G AO length: 30in Width: 1/2in

Please let me know what to order.

Balance is 32” w/o attachments. Weight 32#. Will need three each

Hello, I have a broken window sash. The pin/rivet holding the spring at the base has sheared off. It is stamped with 32B BSI. It looks to be very similiar to your S795-32, except that the top of the string has a metal hook that hooks in the window frame. Can you advise what part I would need t ... (cont.)

I have these balances in my windows (attached mfr label). They are 32" x 1/2 inch I already purchased the following Product Code: 15-194 1" T-Lock Balance Shoe, Closed Cam from Swisco but they do not fit in the slot at the bottom as they are too thick to fit under the metal bar. The balances are ... (cont.)

These lifts are on my Pella vinyl tilt window. The sash weighs 39 pounds. I would like to replace both balances , Slide blocks and metal pivots on sash could you please help me with the Part numbers thank you Brian

Hi: Attempting to repair the balasts on a couple of 35x58 double pain tilt out windows. Unsure of manufacturer. The do have old "string" and block an pully mechanism which I guess I can replace with a newer technology. These would have been installed 18 years ago. The bottom pane of these wind ... (cont.)

I need 26 of these balances 28C; the balance is 28" long. Can you supply the top clip shown in the photo? Do you have the 1" balance shoe with an open top available? I attached the pivot pin that is on the window now-it is 2.5" long. If you only have the closed shoes available, can you recommend ... (cont.)

I have a Milgard Knife Point Part that I need to replace.

We replaced broken shoes with part 15-236 but the windows are still difficult to close and ended up snapping the shoes again. We would like to try replacing the entire balance and shoe. Can you recommend a part? I think we need a custom order since the balances have a hook that attaches via a small ... (cont.)

Looking to order 2 sets of replacements for the channel balance(s) for my tilt out vinyl window. The metal hook on one side has broken and I need that type, as opposed to the above-referenced one that has an eyelet. See pics which show the broken one, with the stamp 30D in the metal. In addition ... (cont.)

Not sure the window brand. On a Ryan home. Finding a label that reads Series 2100.

This is Alfredo Do you have this balance ? Can you tell me the price

I need 2 795 series channel balance c2 paBSI WITH THE HOOK AT THE END

Hey, my name is guy from mfl sliding doors and windows. im looking to buy these parts, and i cant find them. i was wondering if this is a part that you have or able to order. i need qty of 2 springs. thanks!

please review these pictures to see whether you have this mechanism in you store.

Window mm-ch 140060 007 January 2008 spring D16Q CMC 23-7 20B and 26B

Looking through the site I gather I would need the following parts to replace 9 balancer for our home. 5795-33 33 series 795 Chanel balancer 33D 15-216 Block pivot shoe 26-402 Side mount pivot bar 15-224 Inverted link The clips at the top of the balancer have broken off the plastic chanels on the ... (cont.)

Need to replace a number of window balances on my vinyl tilt in windows. There are no numbers on the windows anywhere. They are ribbed 32" channel balances. 32" is the length of the metal balance and does not include the connecter on the bottom where the window attaches. Any assistance would be ... (cont.)

Can you provide a cost for this balance? It appears to be a SerieS795-27D closed CAM 1.25" shoe with a 15-198 clip. I need qty 2 (1windows). Thank you