Viewing all customer Discussions for:

S385-26 26" Series 385 Channel Balance

The number on my old channel balance is 25 4 BN Caldwell. The house was built in 1994. I called a local business and they said the new number for my window channel balance is 2540. Can you help me please.

These are the side pieces that hold the window up (up and down window), the metal part is 25 7/8" long, including the plastic end pieces it is 26 7/8" 7/16" wide, 1/2" front to back The little silver sticker on the inside of the window says: Series 810 code pp0403Warnock Hersey sponsoredthe window l ... (cont.)

Hello,May need your help to identify which balance I need to order from :https://www.swisco.com/cl/1_2-inch-Wide-Channel-BalancesI think my balance is either S380 or S385 (most likely).I have ordered few S350-30 in the past. The shoe 15-004 is very similar/same as that of current broken balance.My b ... (cont.)

We need to replace this piece in our window. The string is wrapped around the pulley and is stuck. It is off track.

Stamped on it is: 25 3 DW CWC 4 No other markings Builder thinks it was either Phillips or Milgard when house was built in 2003

26" long, 5/8" wide, 1/2" dee

Hi Attached are photo's of my channel balancer from Kinro window. Note the stamp which I am unable to determine the weight from it...can you? Does the "CMC 50" mean 50 lbs? I am not sure how this applies to the "options" offered in the purchase window. Otherwise the unit seems to be a good fit/ ... (cont.)

Ink stamped 26 4 CMC 7 Channel 1/2 wide x 1/2 deep

Looking to replace the original balance for my windows. Thank you for your help.

Hi, my balance springs says ?25 A Caldwell CM? . What would be the correct part number on your websites chart. Thank you

I need 4 each for 2 windows. The glass in each sash was replaced with noise attenuating glass and now each sash weighs approximately 25 lbs. The existing balance springs cannot keep window open.

Hello, I believe this is part S380-26 option 2520 I just want to be sure. The measured channel length is 26'' and the width is 1/2''. Also it has 2520 stamped on the channel as well. Thank you for any help you can provide.

Looking for this replacment part. Not sure which one to buy. The side of it says 25 4 EP Caldwell . Thank you. Melissa

This balancer is sticking and looking to replace it. Single hung window made by Mercer windows who are no longer in business. The photo on the green towel has the item number printed on balancer. 25-2 GD5 CMC 61. The other photos are of the bottom and top of the balancer.

Hello. I'm not sure which one I should be buying. It says 25 9 FV CMC 2. Thank you.

I have a 1/2 in non tilt windows, the only markings are 25 4 GO CALDWELL

The thread in the window balance on one side of a window broke. The window is about 25 years old so I assume I should probably replace both window balances. However, I cannot tell from your website pictures which balances to order. The metal portion of the balance in 26 inches. I have included pictu ... (cont.)

A balance spring from a 30 lb Phillips double pane window. The one in the picture is from the left side of the window. etched in the metal is 25 9 34# CALDWELL DM. The window is from 1993. I would like to replace the left and right balance springs

Hello, I need to order two replacement valances for my window. I think the spring broke or something. The balance has fallen down and doesn't go up and down with the window. I am not repairing myself, but want to have parts ready when I schedule repairman. Thank you!

Am I correct that I need the S385-26 with 2540 stamp for my Caldwell 26 4 HO replacements? Thanks, Matt