Viewing all customer Discussions for:

S385-27 27" Series 385 Channel Balance

Am I correct that I need the S385-26 with 2540 stamp for my Caldwell 26 4 HO replacements? Thanks, Matt

I need a replacement 27" Channel balance, measurement without plastic sends. "26DS 33" "BSI" is stamped on the bottom. Thank you!!!

Need to replace one of these.

Hi, I need to replace two different sets of window channel balances. They are both ½ inch wide. They are being used on Milgard windows.One set is marked 26 5 GQ Caldwell and the other is marked 26 4 IQ Caldwell( so I will need two of each, four total)I would like to know price

Hello, could you please tell me what series I need? I cannot identify the plastic end piece/shoe. I may have purchased the same one before but cannot access my account for previous orders. Thanks!

Channel numbers are "26 3 HP CALDWELL" PLEASE IDENTIFY PART INFORMATION

Measures 27" metal end to metal. The plastics ends look differently. Can you please tell me which size we need?

I have two windows that need new balances as the balances slip up past the top of the slider when closed and the pulley systems are deteriorating. The markings on them are 2640 XF BSI, and 2620 NL BSI.

Hi I am missing balances from an upstairs window which is about 33 x 30. The first two and the last photos are from a slightly smaller window downstairs. The second two photos are from the upstairs window for which I'm trying to replace the window balances. The stamp on the downstairs window i ... (cont.)

Hello. I need new balances. Here are pics of the old ones. The channel is 27" long. Thanks.

See attached photos of the balance I have. The metal part measures 27". I'm thinking it's your '27" Series 385 but not sure of the window weight. Thank you for your help...I need to get one ordered.

Need new balancers # 26-4 BA CMC 11 that's the balancers number

Dear Swisco,I have a channel balance in need of replacement, and was recommended to your website. I believe that I need Series 385, based on attempts to match up the top and bottom pieces. Can you confirm that this is the correct part?The metal piece is 27" long. But here's the thing, the origina ... (cont.)

Hi, I'm looking to replace 4 windows with this channel balance. I can't seem to determine whether my channel balance will correspond to your S380 or S385 balance. Please advise. Thanks!

Please help ID which S model Balance that I need to Order.

Need to replace two Caldwell window channel balances. Metal part measures 27 inches. Writing says "26 4 BL CALDWELL". Also missing one metal clip on one side of window, so need to replace that as well.

Hello I am going to need 10 of these balancers. Can you tell me the part number?

I have a Alpine single hung window about, older around 1990. Need to replace both of the sash balance and the balance cam. The Balance is stamped with 26 9. 34# DL Caldwell Width = .5in The plastic parts at the bottom and top of the Balance have fins, overall width = 7/8in. The Cam ( what ... (cont.)

one channel is 27 inches long metal part and the ends are in the photos (all of the metal parts say "26 4 AQ CALDWELL") Second channel is 24 inches long and the ends are the same as the one in the photos (the metal on this one doesn't say anything)

I have a window that the side spring doesn't stay in place and the sash is cracked on the lower pane. The tag inside reads Aama/nwwda 101/I.S. 2-97Vx 1H-LC30-48x84H-LC30-96x72(mull)I think if I could just get the window part with the side springs I could just replace that and not have to mess with t ... (cont.)