Viewing all customer Discussions for:

S385-30 30" Series 385 Channel Balance

Need help identifying the correct replacement. The body is 30" L 1/2" W.

I need to confirm the proper balance to replace this one. It is 30" long and the only markings (shown on pic 101945) say 29 4, B.S.I., G

BSI block & tackle non tilt balances Markings 29 9 bsi. 16 4 bsi Looks like style. S385. Bottom shoe is 1-3/32" deep Need 20 of the 29 9 bsi And. 2 of the 16 4 bsi.

The channel length is 29.9". This is for a single hung, non-tilt window 46" wide by 62" high. The stamped identifiers read: 29.9 OA BSI.Thanks for any assistance you can offer.

Please let me know which part to order. Thanks

Need a replacement

Hi, I am looking for replacement parts for 2 windows the same size (H-LC30-53x96)>I need partsTake out Clips (right and left side)Side load channel balance (right and left side)Top sash guides (right and left side)Length of side load channel balance is 30inchesThe marked writing on side load chan ... (cont.)

This is 30 in long, 1/2" wide (9/16"), and 5/8" deep. The ID stamped on the metal is 2940. Pictures included.

This is from a 37x63 Lawson impact window approximately 15 or more years old Has imp 2950 stamped on it

stamped 2990 38, 30" long, 5/8" wide. End pieces appear identical to what was shown in your video "How to Identify Replacement Channel Balances"

Hello. These windows are indeed of new springs block and tackle on the sides.

Hello,I will be repairing a min. of 5 windows (all the same size). As per our conversation, I have attached pictures of my damaged channel balance. Can you direct me to the correct replacement part?Thank you,John

Metal to metal is 30 inches

Please provide Swisco replacement part number for this window balance. Thank you!Jeff

Live by the beach and all have slowly rusted and broke

29-3

19 3 BX CMC 7 print on back face Metal channel is 20 inches longAlso looking for the black plastic pieces that hold the window channel in place.Ivan

Hello, Recently the tilt broke and the spring came up the top of the window. The white plastic part sheared off so I do not have a complete image of that just pieces. It is a 1/2 inch; 30 inch long tilt but I am unsure which one would be best. I included the top view of the other side which is ok ... (cont.)

I'm looking to repair 5 of my window If you could please give me a quote on parts shown in pictures And everything else you recommend to get these windows working again These windows are 20 years old Thank you

Looking to purchase 6 balances though I don't know model type and part number. Metal is 30 inches long. Window is 20 lbs.