Viewing all customer Discussions for:

S385-32 32" Series 385 Channel Balance

I have a customer that has a long list of sash balances to replace. Here is her list and a couple pictures 31 5 JV CMC 2 (need 7) 31 3 HV CMC 2 (need 2) 31 5 GV CMC 1 (need 2) 31 3 GV CMC 2 (need 2)

Hi, I'm looking for replacement balances for my philips windows. The existing metal balance is 32 inches.

Hello, The nylon wire has popped in a couple of my balancers, so I would like to replace them; however, I don't know the part number of either the wire (assuming it's field-replaceable) or the whole balancer assembly. I also need the clip in the window channel that can be seen in image 6024 attached ... (cont.)

Hi, I need to replace balancers on 8 windows. All are non-tilt. 5 need 32" balancers and 3 need 26" balancers. Attached are the pics for the 32". Stamping on 32" long balancer : 31 9 HS Caldwell Stamping on 26" long balancer : 25 9 ES Caldwell Both have winged bottom guide of 1-3/32" depth and 1/2" ... (cont.)

Looking to replace what we believe may be block & tackle window balances?? Our window (from the mid 1990s) doesn't seem to want to comfortably close all the way and just feels like it's putting unnecessary pressure upwards on the locking mechanism (which seems connected to the base of the upper wind ... (cont.)

The shoe has the number 15P102 in it. The end in picture that starts with 99 should have two wings on it. One broke off. The metal is 32 inches long.

Markings= 31 5 FU CMC 2

Channel length 32" I need help identifying the proper replacement. Let me know if you need better photos or other measurements. Thanks!

Hi there,The stamp is marked 31 inches, but when I measure the metal channel, it is exactly 32 inches. Should I get the 32 inch balance? Also, i have attached the stamp on the balance. Can you decipher this for the weight? Thank you,Louis

Hello, i need this 2 pairs each Hope to hear from you guy's soon.Thanks and Happy New Year

Length of metal channel - 32" Width of metal channel 1/2" Stamp - 3140 Total balances needed - 4

Hi! Can you tell me what part I need to order? I know the 32" is to long. Thank you!

Need a replacement window balance, can you help ID this?

Needing to buy a new window balance. It measures 5/8" wide and 32" metal to metal. It's stamped 31 2 HP Caldwell. I have pictures of the ends.

Please see pictures. The width of the channel is 3/8'. The length is 32". The channel is marked "31 3 BT CALDWELL". There is no hook at the bottom near the pulleys. Can you tell me what parts to order?

I HAVE TWO DIFFERENT SIZE WINDOWS IN MY HOUSE. WHEN I MEASURE THE LENGHT OF ONLY THE METAL PART OF THE CHANNEL BALANCE, ONE MEASURES 26", AND ONE MEASURES 32". WHAT DO I NEED TO ORDER?

There don't seem to be ANY markings. The length is 32". Width is 1/2". Depth of footing seems to be 1 3/32".

Hi There. Can you help me with the correct window spring for my front window? There are so many options and I want to get it correct. The window is single hung and does not tilt. The metal piece is 31" in length and 1/2 wide. Please let me know if you need any other pictures. Also, would I need to b ... (cont.)

I need these for several windows, all 32 inch. I may need a few window stops at the top that screw into the window side but have not really double checked that. (wing channel top stop?) I need the Balances with both the top and bottom plastic pieces. Thanks Mitch

31 4 FT CMC 4