Viewing all customer Discussions for:

S385-32 32" Series 385 Channel Balance

I need replacement parts for my milgard windows. Can you help me identify these? Thanks

Hello! My name is Chuck Watson and I am need of (2) identical channel balance assemblies. And wanted to be certain to order the correct assembly. Photos of the Channel Balance included. Metal channel (only) length is 32" with stamp 3130. Looks to have "Channel Balance Top Winged 19-005. And Winged C ... (cont.)

I believe I need an S385 but my stamp says 32 5 EW CMC 4. Which option do I select?

It has 31 5 BS CALDWELL ; I measured the metal part it is exactly 32 inches long and the place part with the wings is 1.1/16Please let me know if you need any additional information. I will order 4 of these.Debi

Hello Swisco! I need a 32" replacement channel balance (set) but I'm not sure which one to buy. The markings on my failed one are: 31 5 EV CMC 2. I have attached photos. Can you offer guidance for purchase? Thank you! Phil

I am looking to replace several channel balances and attachments in my apartment. As you can see in the attached pictures, the length of the channel balance is about 32", and the width is a little over .5". One of the balances is stamped 31-3 Caldwell JL, and the other is stamped 31-4 Caldwell CM. ... (cont.)

The length of the balance is 32 inches. The marking (represented in the photo) is 31 5 GV CMC 1. The other balance has the markings 31 5 JV CMC 2. Thanks, Erik

Hi, I've bought some of your rollers (for sliding windows) and they've worked great -- thanks. Now I'm working on my double hung windows. I've attached three pictures of my caldwell window balances. I need to order two replacements. I think from other things that I've seen on the web that these ... (cont.)

see attached pictures

Hello,We carry a wide selection of replacement channel balances. To identify the correct replacement for you, we'll need to see an undamaged balance removed from your window since the stamp code on the balance only tells us the spring strength your balance needs to support the weight of your window ... (cont.)

The park is a winged Channel Balance shoe. I've looked through your catalog, and it appears to be similar to the ones you have except for the fact that there is a gap in the middle of the slot that you slide the part on to. This is to make room for the spring holder clip. The ones I see in your cata ... (cont.)

Hello, Please help identify the part with the link to purchase. All 4 of my windows need the parts to replace. It stamps 31 3 CX CMC 7. Thank You Very Much.

Photos of the ends attached. I have three different length/weights but all have the same ends and channel width. They are marked: 31-5 GS Caldwell 31-9 FS Caldwell 25-4 FS Caldwell I believe they are series 385 length 32" and 26" 385 - 32" - 3150 385 - 32" - 3165 385 - 26" - 2540 Am I right ... (cont.)

Grey metal measures 32 inches length and 1/2 inch across Non tilt window

Need to replace a pair of these channel balances, seem to correspond to your 380 series, although nothing you offer matches the 3190 stamp. Can you identify/supply replacements?

The cord broke in these and I need to replace them. I'm not sure how to measure the foot (which angle is measured)The slide is 33" long from end to end including the tip and shoe. It has the following printed on it "31 3 HP Caldwell". Thank you for your help.

Please ignore my previous message. (I got things mixed up because my husband had filled in with another window's discarded original Caldwell the last time one side broke -- thus causing too much play side to side.) Below is correct information: Please recommend which Swisco replacement we need for ... (cont.)

I need 12 of these.Are these images enough.They are single hung windows.Do not know the manufacturer of windows.Thankyou.....and have a good day.Jeff

Please help me to identify which replacement parts to order. See attached photos. Channel Balance Markings: 31 4 DV CMC 8 (the item on the other side of window has 31-40 hand-written on it) -8 needed Also, I need two clips (see photo. One is broken, maybe both?) for same window

these are the numers on my runner. can you advise what I need to order please?The rod is 32" by 1/2". See attached Potos for ends.Please advise which replacement I should order.