Viewing all customer Discussions for:

26-040 Pivot Bar, 3"

Need to order these parts the pin rusted and broke the broken pin is rusted in pivot stash

Not sure if these parts are Millard or some generic vinyl window parts. I would like to replace all the attached parts including the 9 lb spring. Could you help me identify the part numbers

I have a double hung window 33"x47" and the top section has a broken surface mounted tilt latch and the bar that goes into the valance is also looks bent. the Valance spring also appears to be broken. Both are on the left side when facing window from the inside. I would like replace both bars and bo ... (cont.)

Please help me find parts that will work for this window and provide pricing. my mistake the diameter of the rod is .560 inch and is out of round. thank you

27, 374x65 1/4 1200-1 17312771*1*4*1, 1 1 23 7/9x31 3/4.. 12/20 SS Clear Above is the information on the top window sticker I am looking for the channel balances, the tilt locks for the top and bottom windows and also the tilt mechanisms that are attached to the window channel balances as I'm not ... (cont.)

pivot bar for window, but it is a "drop down" and I can not find replacements.

Please help to find this UniFrame Windows part.

I have a 20 year old window I purchased at HomeDepot, I think it's a Americancraftsman window, I have inserted 3 photos of the parts I need. Thank you

I have 15 vinyl single hung windows that need these parts.

Window pivot bar. I see no markings. It is 3 inches long. U shaped ends. 2 holes on top.

I need Five sets of each pivot bar case and pivot bar.

I need to purchase one more of these little metal pieces for the other side of the window. What is this part called and do you guys carry it?

Hello.I need to replace 3 components for one of my single tilt window sashes. The pivot shoe has a number on it (796). I've read some previous posts that said it is no longer made. I measured mine as: thickness-1/2"; width-1 1/4"; length-1 7/8". It has a pointed end on one end and is flat on the ... (cont.)

need help identifying these coil balances

Hi, trying to get these parts.

Hi - looking to find replacements for the tilt & turn mechanism. These did not seem to readily let me remove the windows. I think I need to loosen the metal rods and pull them out. I've had experience with windows that lifted/popped up once rotated. window latches (plastic) look to have 2 3/8" scre ... (cont.)

We were sent to your website by Great Lakes Window out of Toledo, OH to source tilt latches for a 43.75wx57.50h double hung window that they no longer manufacturer. If you could please provide us with the part numbers so we can service our customer and order these, I'd appreciate it. Thanks. ... (cont.)

We bought a house with older replacement windows. We are trying to avoid replacing the windows if we can get them back to working order. The first window I took apart, the pivot shoe came apart in pieces. Need pivot shoes - based on the measurements, 2" x 1 1/4" x 1/2", part has Pat. 3,055,062 st ... (cont.)

Hi, I am in need of these clips. The ones you sell are similar however the tip sticking out needs to slide into a track like area where the counterbalanace is located. I also am looking for Pivot bars that look like your 26-369 without the flair part. The flair type is on the upper sash of these dou ... (cont.)

Old windows. No identifier anywhere. I need to pull the existing corroded Pivot Bar to see what size, etc. However, looking to replace the coil and 2 other pieces needed in the pictures. Lack of knowledge to name each part. Sorry. Thank you