Viewing all customer Discussions for:

26-040 Pivot Bar, 3"

Hello all, Please recommend a replacement coil balance and the pivot bar, also need a pice of seal. Thanks

Looking for a replacement pivot bar. Assistance is appreciated. Thank you!

Balance is 27" long. part# on the side is 26 5 BY CMC 6 Thanks Frank

Hi , I have ordered in the past and the part # 15-180 seemed to work well but was hoping to get a few complete units, spring, housing and shoe, did see anything that looked to match .

Attached are two (2) photos of what parts I need. The security latch at the top of the window and the metal attachment that goes on the bottom of the window on each side to hold it in place in the spring lifting attachment to help hold the window in the outer frame work. I'll need four (4) of the s ... (cont.)

The tilted part of the window is all vinyl weighs approximately 20 pounds. The right hand top tilt latch is damaged. The Pivot bars were both rusted out they are 3"long. The pivot shoe was measure at 2" in length,1¼"wide, and ½" thick. The spiral Balance rod was measured at 3/8wide and 34" long. It ... (cont.)

Need 4 Chanel balance fo lit windo

I'm trying to repair several windows and could use some help in identifying parts. The name on the window is Mastic. I've included pics. - I need the tilt locks. - I need tilt spiral balances that are 26". The tube measures 1/2" and the color looks to be blue. - need help in identifying the piv ... (cont.)

Metal that inserts into pivot shoe from the bottom of the window

The part that hooks the pane to the slider (shown in the picture) rusted and broke. I want to replace the slider and the broken part. Not sure how to extract the slider shown above. Claude

I'm thinking of the series 765-27 inches long. My sash weighs 20 pounds. How do I attach the balance to the shoe? And what pivot bar do I need? I need four.

Looking for spiral balance 28". 3/8"dia Pivot shoe with matching pin

Hi, The pivot bars have rusted out on my windows. (Located near to beach) Questions: 1. Can you please advise the correct replacement parts if possible based on the photos and below measurements? 2. Based on the condition of the pivot shoe and broken / rusted piece of the pivot shoe in the slot - ... (cont.)

Hi, i am trying to locate a replacement pivot shoe for upper tip in window . Cant find mfg.sticker or model # on any of the windows. Part in attached photo is the broken shoe. It measures 1 inch wide, 2 inches tall, 3/8 inch Depth (thick) ty

As arranged during today's telephone conversation, I am attaching pictures of balances and pivot shoe that I need. I need six (6) 22" long 9/16" wide balances, and four (4) 28" long 9/16" wide balances. Also I need 10 pivot shoes - when I am measuring the pivot shoes. I get dimensions: 2" long, 1" ... (cont.)

do u still stock metal piece for slide window

I'm not sure what part this is hopefully the pictures will help

Here's the pictures. The issue is trying to remove a rusty pivot bar which I can't seem to dislodge, in or out; and replace it with 26-040. Thanks, Rich

Property Manager, looking for part for windows, side rails, bottom locking pins, and top thumb locking assembly.

keeps the window in the track