Viewing all customer Discussions for:

26-083 Pivot Bar, 2-1/2"

My techs' comment's: Can't test out the balancers because the pin is broken also, they're not a standard balancer. Looks like it's a coil with a pulley built into it. Pin that slides into the bottom of the window is approximately 2 3/4 long 5/16 wide and approximate a quarter inch high ... (cont.)

I am looking for help with buying and replacing the coil balancers in the attached photos. Scott

From my last email, I need to order the coil balance pivot shoe # 15-259 to fit with my old Simmonton model windows. I would like to know which coiled balance spring I need to buy, knowing that my original ones have the # 405 on them.And do I need new certain teed lance spring cover on them?Is it ok ... (cont.)

I need help find this pivot shoe for a coil balance. sizes on images

I have a Sininton Window and am hopimg y'all can assist me above fotos show thw pieces i need to replace ....on both sides please let me know so i can get to it

Hello can you tell me what parts I need?

Hi,We have Simonton replacement windows in our home that were put in by the last owner. The coil balances are breaking and we need to replace. Not sure what parts are needed. We took the coil balance out of the window for you to review. Your help would be appreciated.Thank you,Liz and Rich ... (cont.)

I am in need of some coil replacement for my Simonton windows. They are 20 years old. I am not sure what type or size to purchase.

I need a balancer assembly and a pivot bar for a Simonton double-hung sash. The balancer goes on the right side of the window facing it from inside the house, and the pivot bar goes on the left. the photos of the installed balancer are of the left one, as I had already removed the broken right side ... (cont.)

HiWe have older Imperial brand windows and need some components to. The spring that balances the vertical slide window broke on two windows and I am trying to locate replacements. I would purchase 4 if possible.ThanksJoel

Hello, Im looking for the attached window pivot bar and the vinyl housing. Thank you!

I am look for replacement coils, shoes and pivot bars for Simonton hurricane rated windows. They are double coils. The coil is stamped 408. The coils are 3/4" wide. I have pictures. Can you assist me?thanks,Gary

Need to purchase 8 balance assemblies for: Simonton Double Hung Windows 8088643/09 30.2500 58.2500 65DHWI 50073LEAR 6/25/04 B23WH The window weight is 18 lbs. Per your documentation, this would suggest I need (4) 4.5 lb springs in the new assembly. Would this work with one 9 lb spring? ... (cont.)

The plastic that holds the balance shoe has broken on both sides of the sash. I've sent pics of the info attached to the window. Do you have replacement parts?

Need 2 each of balance blocks, coil spring, cover, and sash pins shaft.channel is 1.25 wide and 13/16" deep

I need 8 of these but not sure where to start

I recently ordered what I thought was the correct replacement pivot shoe for my tilt in Simonton window. I was way off. I've mailed my return and would like to place an order if you can identify the part from the pictures I sent you. Thank you!

I need to replace the plastic bracket that holds the shoe. A bunch of them have snapped in the windows around my house. The springs are all present and in good shape as far as I can tell.

We had an old plastic insert where all of the parts basically failed simultaneously. Both pins broke off. The locking guides that hold the pins broke. And the safety latch broke.

Hi, i need several springs/coils and the metal rods that attach to the window that go into the spring/coil. I did not find any manufacturer name on the window....I'm hoping its a generic window and you have the parts. Thank you, appreciate any help. Tony