Viewing all customer Discussions for:

15-208 Pivot Lock Shoe, 9/16" Thick

This in from a pennco window. Both cams in the shoes have broken.

I'm looking for replacement parts for my Harvey Vinyl double hung windows. The part is called the "Terminal Housing" the pivot bar fits into the terminal housing. Thanks!

33 hd is stamped on the balance the balance is 34 in long no ends the balance is 9/16 wide and 1/2 deep it floats in the wd jamb a bushing keeps balance from sliding down its a penco single hung window made in 2004 16 yrs old

hello...I believe that these photos are of the pivot base of a Simonton window... the part dimensions are 1.25" x 1.25" x 3/8" thick (as measured in place)... Do you need more info or... can you recommend a part no based on the photos and dimensions ? Thanks

window V1020W

Looking for a part to repair a vinyl tilt in window for our home. The plastic has degraded and broke when opening the window. Have been unsuccessful thus far figuring out what part I need and the procedure to replace it. The window is ~ 20 years old. I don't see a part number or name. ... (cont.)

Hello, I have Pennco windows (now about 18 years old) where the metal cam inside the sliding lock shoe/sled has broken (the ones pictured here are not broken). The weighted cord is attached to the shoes with metal hook. These appear to be about 1-1/4" wide X 1-1/4" high X 17/32 or 9/16 deep (it's ... (cont.)

This black plastic "guide" (name??)was somehow chewed up by my renters and now the window won't go back in because this plastic guide won't pop back into place and sit flush. Should I mail in the part so it is easier to match. Selling home, this repair critical to make closing deadline. ... (cont.)

Pennco single hung vinyl window , part# J1MAOW3660 *A ,2070sh 3050 3/4 mm EL low E W, Tilt carrier is broke ,need replacement part!

The window is 38"W x 44-1/2"H. The spring balance on both sides needs to be replaced. The balance channel is 42" and the spring is 26". I'm looking to replace all parts on both sides

I'm looking for the Pivot locks in the pic. They are from a Pennco Tilt Window. It looks like your part no. 15-208 7/16" is close match.

We have double sash bonneville windows bought in 2003 the grey part the allows window fo tilt in is broken. I also have put a block to hold window open The bottom part on 2 on right are broken

Window balancer to keep window in place

I need to replace the balance and tilts on two windows (4 of each needed) for a customer. Their pennco windows house built in 2000 in Middletown delaware. I believe Ryan homes built the development if rhats helps at allI have more photos and the old parts if you need more information from themTom ... (cont.)

I'm looking for help identifying the balance in my Pennco windows. I was able to identify that your part #15-208 is the exact right pivot shoe for my window (I don't know if that helps). I can take any other pictures of the balance that may be needed. Thank you in advance for any help you ca ... (cont.)

As you can see the pivot lock is broken. I have many that are broken. It looks like a 12-208 to me. Am I correct? Does it matter that the lock is in the back instead of the side? Thank you Rob

Help! Channel balance? Part with spring is broken. The metal part is 34" long05/2 Unique 33-D-40

The pulleys in my tilt vinyl windows are broken. I need to replace the channel balances but want to make sure that I get the right part. 5/8"depth 9/16" width. Length is just shy of 20.5". Can you help me find the right part? I don't know the brand of the windows, these were installed some years be ... (cont.)

I need to get two of these parts please

This is Harvey widow spring balance with hook pivot shoe. I want to replace it. Please let me know which best replacement part