Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

I'd like to order replacement operators but need to get left side open to get measurements. The handle says weather shield but the right hand side slide says it's a Truth. Please advise. Thnx

Hi! Hoping to identify the replace for this crank (need both right and left hand versions for two windows). The arm has the number 30382 on it. 358-1R is on the plate installed in the window. Both cranks are stripped and/or have broken teeth so need that crank/handle/arm assembly. Window hinges and ... (cont.)

it's in bronze LH on the operator has no other numbers

Hi, I need to replace 6 window bottom hardware.

Our window does not close properly. We need to have the AC on but our window wastes it alll. I have put a picture showing what's broken we need the part ASAP

Seems like a generic type crank. The distance between mounting screws is 3 3/16".

truth 30744

"Truth hardware" on all parts RH parts all inscribed with the number "5" and lettters "RH" LH parts inscribed with "LH" and number "6" 13.5 LH & RH operators inscribed with "40055" 9.5 LH & RH operators inscribed with "40056" House was built in 1984 and these look original. Ignore colors. Thank ... (cont.)

I think it is a Milgard product, the gear teeth cannot engage, it may be worn out.

All It has marked on it is Anderson. I just need something to replace this not sure it matters the brand.

This is a sill mount casement crank with are length approx 10.375 center to center and 7/8 diameter roller The crank housing measures 4-1/16 long x 1-1/2" total width of housing is 2-3/4

Hi! Trying to find replacement for this TRUTH window operator. Stamp on short arm says 30744.

The Bracket on the exterior of the window #3 closed side snapped. I am trying to replace the mechanism instead of the window. Can you help me with the parts I would need?

the only identifier stamped on opener is thuth 35 A stamped no. of the arm says 30050

Hi. I was wondering what the difference is between the 39-027E Ellipse style single arm operator and the 39-412 Offset operator. The descriptions for both are the same. Thanks

Looking for replacement window cranks. Stamping has "wright" and "7701" on it and appears the arm measures 8 inches.

Hello! I own a 1973 home and some of the arm/crank mechanisms on the bedroom windows are broken and need to be replaced. I am trying to find replacement parts. Unfortunately, there are no markeings/labels on the windows for identifying them. In the photos, you can see the problem - the arm/wheel dis ... (cont.)

I need to replace 2 casement window cranks - the number on the bar is 358 - 1R. I would like to replace the mechanism on both windows left and right. Do you have this part?

I replaced my c.1985 Truth casement window operators on ten windows last year using 39-014 and 39-013 operators. I now am replacing six on the same brand of windows but they are narrower and have 9 1/2" arms instead of 13 1/2" arms. I think the same operator with the shorter arm are 39-412 and 3 ... (cont.)

From '94 in eastern Mass. The part which attaches to the bottom corner of the window pane, and slides side to side, is rusted/corroded on several windows. This has caused them to want to be stuck in the open position. And to close them for now I need to push in from the outside while someone else cr ... (cont.)