Viewing all customer Discussions for:

26-405 Rounded End Pivot Bar, 2-7/8"

This item is used for opening window on each side

I have WinCore Windows in a home I just purchased. Sliding hardware was discovered broke. The bottom panel pivot/slide component is broken. When the window is unlocked to clean/wipe, the pivot rod at the bottom of the pane is broken. I hope this is descript. I can provide pictures. ... (cont.)

Windown pin broke and lost. The shoe is still in the frame track.

I need several pivot bars: 5/16" wide 2 7/8" long Holes @ 1 1/4" and 2" from head Head slightly expanded to look similar to a nail, with a flat spot following the head

I need a replacement for this window coil balance.

Hi guys , would like to know if your parts are alike to the ones on the picture; tks.

Hello Swisco, I need two of these one Left & one Right. Please help ID if you can. Not sure of the manufacturer, maybe Curtain Teed. Fairly old windows. I hope the pictures help! Thanks!! Jerry

Good Morning, I'm having a repairman fix older Vinyl Double Hung Windows that unfortunately have been discontinued. I was lucky enough to have been given some spare Provia parts that are working well as substitutes for the Originals but I'm having trouble finding more of the same parts to fini ... (cont.)

I need this two parts

I am looking for a replacement part for a window that I cannot find any make or model on. Please see attached photos and let me know if you can advise on the replacement parts. If more photos are needed please let me know. One Swisco rep thought the latch 26-442 seems like the right size. Mine onl ... (cont.)

The balance assembly in the window is broken at the bottom piece that sits under the coil in the track. Also, the rod that extends out from the bottom of the window is broken.

This is the part that fits in the shoe inside the window sash to keep the window from falling down.

This part is from an Anlin window that is around 13 years old. The part is a little less than 3" in length.

See Pictures attached. i need 6 of these quoted. Do these come as a unit or do I need to order these pieces separately?Can you identify what I need To purchase please. This is 1 1/4 W x 2 3/4 HThickness is 7/8Thank You,Kayla

I'm trying to help my neighbors with their broken window. Both pivot bars are snapped, but they don't know what brand of windows they are and I can't find any identifying markings. Basically all I know is what's in the attached pictures - the pivot bars are about 2 9/16" long with 2 holes 3/4" apart ... (cont.)

I did a little online research, I think these are from an Anlin Coronado window. The pivot rod has a "4" on it.

Looking for these replacement pivot bars. Doing this for my mother-in-law and do not know the maker of the window. Hope this is adequate information. Thanks, Joe

I'm fixing up some windows in a new home, several of the pivot mechanisms are old/broken so i am trying my best to troubleshoot and replace. I recently bought a set of the S140-9 (L and R) as replacements for an Alside window (I believe the now discontinued excalibur version 0201). I was able to re ... (cont.)

Hello, I bought the pins pictured above but they are too big to fit into the window. I need a pin as pictured below it. Thank you

This is from a window labeled "Homeview." After breaking, the window will not stay open. Can you help? Thanks!