Viewing all customer Discussions for:

26-226 Pivot Bar, 3-1/16"

At the bottom section of the window there's a pivot piece (the window can swing inside the home). This part is broken. It appears to be rod, that runs from on side of the frame to the other, but hard to tell exactly. The windows do not latch to the bottom of the frame and it causes the bottom of the ... (cont.)

No identifiable numbers or markings and shoe is broken, so pivot bar is unable to rotate it with sash in place. Sash weighs 28.8 pounds.

Order puins

Please help identify what the correct pivot bar would be.The windows are radiance, and I have included a photo of the sticker on the bottom. Thank you, Kim

I need help to identify a replacement for this constant force double spring window balance (left side). The only identify mark was #2 on the right side balance. The metal rod that fits into the window is broken off. The other components appear fine. I think in only need the metal insert with the rod ... (cont.)

I need two pivot bars as described below. Please let me know if you can help and what the cost will be including shipping. Thank you Sliding window pivot bar: Total length: 2 3/4 inches Center of bolt hole to center of bolt hole: 1 inch Width: 1/4 inch Depth: 3/16 inch Distance between points on ... (cont.)

Hi, I need to replace this part of the window and the clips. Where can I order from?

The existing bars are 2 3/4 inches long total. The one hole from the locking end to the center of the hole is one and 5/8 inch. I found some that you have that have two slotted holes however it appears the center of the first hole is an inch and 3/4 back from the locking end. If you could please hel ... (cont.)

Hey there, I had no problem identifying my pivot bar as the 26-226 as they had snapped and were removable. This is my pivot shoe. The channel depth seems to be around 5/8, width around 1 1/2 and height about 2 inches.

window balance broken on double hung Jeld Wen window 2004 approximate year. Also, on another window, the pegs that fit into the balance broke on both sides of the window, not sure if they make replacement parts for that or need new window. It is a wood clad window.

the spring coils are ok. but need all other parts

Pivot single hole number five on one side

Hi, I'm trying to find the window stops and balancer for the grandview windows in my home. I need 4 window stop pins and one set of balancers.

W: 1.5", H: 1.25", thickness: 5/8" The channel opening 3/4" Please see pictures

I need to order 2 pivot bars. I think they might be 3 1/16 inch. The other part of the bar broke off and fell inside window. See photos.

Good afternoon: Hope all is well with you, your loved ones and your team mates. Please see the attached picture of some window parts I need to replace. I was unable to find any markings, names nor part numbers anywhere on the window or parts. The only thing that came close to resembling a mark was ... (cont.)

Hello, I've owned my home for several years and am finally getting around to fixing some poor-performing windows. I need some help determining what pieces to order and would appreciate your help. I have double hung windows at look like they were installed in 2005. The label says series "0401 double ... (cont.)

I need seven sets of these parts for "construction grade" vinyl, double-hung windows. I have more photos if you need them. Thanks for your help.

Hello, I camt find what brand of window I have. See pics for the only codes I could find. (CERTAINTEED?) I found the pivot bar (part #26-226) that fit in the shoe but I want to make sure I get the right shoe. If can send me a part # that would be great. Also, if you have a heavier duty pivot bar tha ... (cont.)

Hello. I'm sending a couple of photos of my pivot bar for a double hung tilt window. Any idea if this will work with your pivot lock shoe #15-188? I thought I might have to replace the bars as well as the shoe but I might be wrong. I have a no-name window brand btw, installed about 25 years ago I'm ... (cont.)