Viewing all customer Discussions for:

15-195B 1-1/4" T-Lock Balance Shoe, Open Cam

Trying to determine which balance shoes we need and also some tilt latches. The balance measures 27 inches and the top string is put in with a screw. The balance has 26-5 on it and also letters TH and BSIN. Patent # on plastic shoe is 6679000. Square part of tilt latch measures 2 5/16" by 11/16 w ... (cont.)

Hello Swisco help ? Need 1, 1 1/4" open cam part 15?1 95B this part has already been identified when I spoke with Steve on the phone this morning. However, the pivot bar is another thing? The one in the photo is two and three-quarter inches long and it has a T at the end. Which pivot bar is the ... (cont.)

Hello,My window balancers are inverted balances with T-locks and are stamped with the number "27B" as shown. I need 6 replacement T-locks to repair 2 window sashes and keep an extra pair in reserve. The T-locks have the top anchoring portion broken away (~14 year-old windows) and I need to know if y ... (cont.)

Greetings. I have balance marked "32 5", as shown in one of the photos. It is from and Anderson Silver line window that has a bottom sash that flips out, but the top window is fixed. The balance is 32" long, 9/16 inch wide and 1/2 inch thick. The show is 1 1/4" wide and 15/32" wide at the top ... (cont.)

Hi. My client has a houseful of Silverline 1000 series DH. each sash glass size 32" x 25 1/4" The inverted balances are 25" and are stamped 24 5 BSI rm Looks like open cam 1 1/4" T lock Will your 795 series work? Thanks

I bought 50 of the 15-195B as they appeared to be the right size, but the body is too deep for the hook to go behind the connector bar. I have about 30 double hung windows (~120 shoes) in a house I bought almost 2 years ago, and many (most/all?) have broken shoe hooking points. The house was built ... (cont.)

I am looking for a custom balance order. Balance measures 21" long. Sash weighs 28.6LB. I need a quantity of (2).

HELLO , I NEED BOTH PARTS PICTURED. COULD YOU HELP PLEASE ?

Hello! Recently I had a window channel block and tackle balance give out. Unfortunately the windows don't have a make or model. They are tilt windows. The metal shaft is 36" long. I've attached photos of the ends. Please let me know if you need any others. Really hoping I can fix this! Thank you! D ... (cont.)

Need these balancers26 inch rectangular tube

Hi, trying to locate these balances for tilt-windows. Please let me know if you need any additional information. Thank you!

CPD# SIL-N-11 2111C Single Hung lowE2 Need to replace window spring and the lock on this window

I'm not sure if this channel is 26 or 27 inches? The metal channel measures 27 inches. It's stamped 26-5. I do not see any letter to determine the weight of the window ether! Thank you Frank

The sash retainer clip/counter weight is broken.

This is a 25" 795 series window balance I just need to know the shoe part # and also what type of attachments are available that screw at the top of the balance. ..please just give me some references so I can look through and determine what I need

Does the 1-1/4" T-Lock Balance Shoe, open cam has left side and right side? Thanks! Jerry

I am looking for a spring for windows probably hung in 2003. There is a hook on one end and a circular section with "ears" on the other. First 3 pics show relevant parts inside metal casing. Last 2 pics show backside with numbers included (Pat 4610108 on plastic circle and 34B BSI et stamped on meta ... (cont.)

I Need stock numbers for 1 1/4" T-Lock Balance Shoe and Tilt Latch Pairs for the above windows

Hello,Happy Black Friday.I would like to order 4 replacement sash springs for this Ply Gem Silverline. I would also like to order 4 of the tilt shoes.Thank you so much,Bill 11/26/21

Doesn't look broken but is immovable or locked. 21 inches channel, 1/2 inch in width and depth. Marked 20 - 5 RM BSIM. Dash is faint and may be only from use. Was able to easily lift the two of them from both sides of window without removing window panes.