Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

I've been trying to replace the block and tackle on some windows that were installed incorrectly. The company I've been working with is having problems finding one of the end pieces. They suggested that I try your company. I need multiples of these and I'm really hoping you can help me out as I do n ... (cont.)

Hi, We need to replace a window channel balance for a Lawson window sh-7700. Would you have the parts in stock and what is the price as well please?

I have two sizes of window balances. 11" and 24".

I felt good about placing an order, but then I reviewed the picture of the shoe and the 1 3/32 measurement through me off. I need 6-3330 and 6-2740x complete balance. Will the shoe work compared to my photo?

Please find below pictures of the plastic stops I need. I actually need two pieces of those ( first two pictures) and one complete kit ( for one window) or two pieces of Channel Balance. Regarding the shoe the depth is 1" which makes the 15-005 the right one. I will only need one kit or the two Chan ... (cont.)

Balance is 28" long and is stamped with 27 4 CALDWELL HM. Pictures include both ends including the stamped information provided. I will need a total of 4 balances for 2 windows. Bottom shoe looks like 15-004 and top shoe is similar to 19-002 but has wings as shown in picture

Talked to Steve just now

Cannot find Balancer 2320 with black plastic top that screws to window's track end cap.Please help identify balancer needed.Non tilt window, ½" wide and 24" long.Top black plastic piece has hole for screwing it to window channel cap.

Looking to replace the wide channel balances for 3 windows -also need replacements for 3 single hung windows security aluminum coastal 240 windows (window size 33 X 26) no pic of rod included for these windows- can you tell me the part numbers I need to order

I have a set of window balances and the only stamp I can find on them is 27 1/2 3 Caldwell FM. I need to know what the series is or something. Thanks.Renee

30.75" in length from plastic tip to tip. Aluminum piece is 30" in length x 1/2" wide. Spring is 18". 9230 is stamped on the aluminum. Also need the two plastic end pieces shown in attached picture.

mine are single hung windows, over twenty hears old. One is stamped 20 3 KP Caldwell, and the other 26 4 LP Caldwell. I'm looking at 380 and 385 as likely clones but can't decide which. What is difference?

Hi,Two of my window balances are broken and need replacement. I have attached photos of stamp and plastic shoe on both ends.When i measured the metal part (not including the plastic shoe part on both ends) they measured as :- part that says 25-9 KX CMC 7: metal part is 26"- part that says 26-9 BA CM ... (cont.)

Hi, I'm thinking 2740 balance + 19-002 top + 15-005 shoe. The balance has a marking "27 4 D0 CALDWELL" Please see the photos attached - what do you think? Thank you!

Hello, I like to order channel balance 2340, 24" series 385. It is not clear to me if top and shoe balance are included or i have to order them separated. I that case is it possible that Swisco can make the balance with top and shoe for me. I send hereby pictures of top and shoe. Sincerely Yours M ... (cont.)

Have Kinro brand windows. Caldwell series? Need to replace the balance sashes. 1/2 " with 26 4 KR stamped on them. Can you tell me what to purchase?

I have a few windows I need to replace the balances on, the markings on the balances are as follows 26x 4 need 10 balances 14 x 2 need 12 balances 26 x 5 need 14 balances 22x3 need 4 balances 20x 3 need 2 balances These were the numbers stamped on the parts

Hi! I need balances for 5 windows. My measurement for the width for the balances is 5/8. The balance is 28 inches. The window pane is 34 inches x 29 inches. I attaching a picture of a patio door handle also. Please let me know what to order. Thank You!

I recently purchased several channel balances from Swisco and discovered that though the length and weight capacity is perfect; the bottom guide (foot) is different and will not allow my windows to fit back in properly. See photo; from back to front it is 7/8". I also ordered some sash guides whic ... (cont.)

Hi - thanks so much for reaching out! Based on your photos, it looks like you have either our Series 380 or our Series 385 channel balance. The difference lies in the depth of the shoe. The Series 385 balance has a 15-004 shoe, which is 1-3/32" deep while the Series 380 balance has a 15-005 shoe, wh ... (cont.)