Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

Hello, I was hoping by the pictures attached you could tell me which balances i need to purchase. There is no engraved numbers just a printed code 16 4 IP Caldwell

The markings are 27 1/2 3. That?s all it says on the old one... help! What replacement part do I buy?

I need 2 channel balancers 1/2" with 19-037 tops and 15-005 shoes. There are no markings on the windows to tell me the manufacturer. The balancers are stamped with 2920. Windows are approx. 35 yrs old. single hung non tilt. The channel that the balancer slides in is about 1 1/4" wide ... (cont.)

I have looked through the stock offerings and do not find a match for my Traco Impact Windows. Thanks to correspondence that I found online between your firm and another customer who must have the same windows I found some part numbers for the top (19-041) and shoe (15-005) components. I checked th ... (cont.)

replacing Milestone series 1000 channel balance maybe S380 29? length is 29 "

Recently, I ordered some parts to repair some channel balances -- channel tops, shoes and rivets. I guessed correctly on the tops, but not on the shoes. Could you help me identify the ones that I need to order? I have posted some hi-res images online for your examination.

Hi, I need to replace 4 broken channel balances which seems to be custom made as I cannot find them in your catalog. Those channel are used for Traco single hung impact windows (no tilt) Metal channel lenght is 24 in. The top seems to be new security 19-041 Shoe seems to be 15-004 ... (cont.)

Hi my name is Maria and just spoke on the phone with Casey, about replace balance . This are the picture of the what my windows having now. Also you will see 2 little pieces of white plastic that are broken and was screw on the window frame and have no idea if need or not.

I need 6 balances and supporting hardware for 3 windows. The manuf. was Traco, 240 single hung, impact resistant NOA # 99-1028.06. The windows are approx. 44 1/2 wide by 33 1/2 inches long. Inside the window frame I saw the following 897832 9 COL LDHI. The stamp on the balance reads 31DS PJ 38. Coul ... (cont.)

Hello - Bought a 15-005 shoe to replace broken one, but new shoe doesnt fit onto balancer. My old shoe has a rounded slot to clear clip on balancer and the slot is wider. Seems ok other wise. Please advise

Single hung window. 9/16 wide My old balance is stamped 32B what weight option do I choose. Also, how do you accurately measure the shoe, I'm looking at either the 15-005 and 15-004. Is the measurement taken from all the outisde edges? Thank you for your help.

I need help with purchasing 4 Block and Tackle Window Balances. I've identified the 28'' series 351 channel balance Product Code S351-28 on your site as a good replacement for my window balance but with a couple of issues. My top and bottom don't seem to match up. Below is some information to go ... (cont.)

Hi. I'm looking for about 10 window balance Draco 35DS 38 and the little bottom blue cap Thanks pat

I cannot tell what shoe is on my channel balances. I've determined that I need either the Series 380 Channel Balances with 15-005 shoe attached or the Series 385 Channel Balances with 15-004 shoe attached. From the photos, can you determine which one I need? Sincerely, Elizabeth

I have rollyson top window sash guide 60-675BL. I understand the Black is no longer available and only the 60-675 in white is available. I wondered if it's possible to tell what window model I have as well as the balance model based on the sash guide number.

I need the window balancer which has markings "25 5 BW CMC 7". I needa replacement ASAP.

I am trying to repair a couple of windows in a circa 1973 home located in Melbourne, Florida. I'm starting with the two smallest windows, but this could blossom into a rework of 20 more windows.... The issues I am having are that a number of plastic parts are broken and the windows don't slide v ... (cont.)

I am hoping for help in identifying the part pictured above. Its from a vinyl double Hung bottom sash. The metal channel is 26 inches long with the marking 25 3 Caldwell HM. The only other marking I could find was a C on a small aluminium hook at the end of the spring. Also if you have a link showin ... (cont.)

See pictures attached. The stamp state g-23-3. Non tilt. Looks like S377 but not sure. Thanks. Andrew

They are 1/2" channel balancers, two different lengths from separate windows. One is stamped with B.S.I. 27 C but measures 28" the other is stamped B.S.I 33 C but measures 34" long. Both balancers have the same end pieces, the T shaped adapter on the spring end is about 1 3/8" wide. The far side nea ... (cont.)