Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

I looked on your site but could not find exact match. Looks like 15-005 shoe but can't identify top. Stamping is 2640 BSI AH. Metal is 27 inches. Width is 1/2 inch.Photos attached of shoe and top (black).Any match on your site?Thank you,Ginger

Would like to identify and purchase proper replacement part for my Milgard Sash Window. It has a 21-inch channel balance (excluding the plastic tips. Photos are attached. This is the left side. Can you confirm the same channel balance will fit on both the left and right side? If it's the same p ... (cont.)

this seems to be like the Series 371 Channel Balance with 19-031 top guide and a winged 15-005. However on my balances the "wings" are about 1-1/16. Any insight? Thanks!

Please recommend a replacement channel balance

To whom it may concern The length of the window Channel metal to metal end 30 in See photo above for plastic ends. Could not find any numbers anywhere. I need to know your part number to order. thank you, Mitchell Feldman

I need channel balances and window locksthank youPeter

Can you help me identify replacement options?

Need to know a part number so I can order some replacements. Thanks!

Looking to replace two windows with 3220 stamp and two windows 3230 stamp. All windows same manufacturer.

27" x 1/ 2 metal ,, just want to know the exact part to buy, need 6 tracks complete,, and would also like to know the part # for top and bottom plastic pieces ?? Thanks!

12" channel, 27" long, Stamped 2640

Hello,I need to order two of non-tilt window channel balances for replacement of broken ones on a bedroom window. I used your website to determine which to choose but was unable to determine which of the S-series channels to order. The channel is a 1/2" channel width and a length of 24". Since I ... (cont.)

My damaged channel balance is stamped 2320. It is 24" long. The attachments at the top and bottom are shown in the photos. Which series matches these attachments? Thanks, Matthew

Looking for a stamp 31 5 for a sash window.

Hi there. It sounds like your balance may have to be custom made due to the weight of the window. Before we 100% confirm that, we will need to see some photos of the complete balance removed from the window. From there, we can get back to you with more information.

Please see photos uploaded. NEED:1x - 17" - 1640F - 1/2" (one of this)2x - 30" - 2930F - 1/2" (two of these)1x - 30" - 2940F - 1/2" (one of this)Brand of window is also identified in photo if it helps.Thank you.Vanessa

Good morning,I am trying to replace some widow balancers in my home. The windows are Milgard circa 1994. The uploaded is missing the spring, any help would be appreciated.Regards,Jon

I need 2 BSI 2740 window channel balances with ends to replace my current broken ones. Pictures attached. Please take a look at the pictures and let me know if you have the parts. Thanks, Helen

Hi, Looking for the correct part number for a window channel balance. Non-tilt windows Length of the metal channel is 17" Width is about 1/2" Stamped on side are "16 3" and "D H" This window is remote to me,so would you please also give me alternate part numbers for any channel balance shoes that ... (cont.)

White plastic piece at bottom of channel balancer. The only number on the channel is 2320. Other channels that are the same size say 2340.I need the stop that is on the sash that, when missing, allows the channel to spring up to the top. (photo in this post). Also need the bottom plastic piece tha ... (cont.)