Viewing all customer Discussions for:

82-268B Multi-Point Mortise Lock

I purchased the mortise style handle set #82-080 - which mortise lock / striker plate do I need to purchase that will correspond to this handle set?

Please help with everything I need for my sliding glass door

I do not find any markings or names on the hardware. Color of door is beige.

I need to have another one of these (see photo) for my 2nd sliding patio door handle to latch into with the double hooks that come out. Is this the right one? how deep is it? Mine is 5/16 ? Peggy

Hi There, I hope you are all well and safe. Was hoping you have a part I need for a 4 panel milgard 5621/5631 series sliding door. I believe I'm missing the strike plate. Also one of the screws that retains the spring is bent. Do you sell the screws, springs and strike plate? I "think" the original ... (cont.)

4-7/8" handle (screw to screw) 2-3/4" inside latches 4-3/8" outside latches

The inner door handle broke so I am needing to replace the handle all together.

Looking to replace the interior mechanism and inside locking tab to this door handle. I can't find parts for this anywhere.

My client wants to have installed a key lock on the exterior of her sliding glass patio door. What would be the proper replacement for this project? I appreciate the help with this.

Hello,I have a problem with my patio door latch. The lever (Product Code: 82-240) has broke off with split part of the shaft stuck inside the Mortise latch. I tried taking it out with narrow pliers but couldn't. The easy solution would be to replace the whole Mortise latch. However, by looking at th ... (cont.)

Handle will not move out of the locked position. Looks like a tight fit to get this off.

There is a missing piece that screwed onto the right door (img-8660) that has disappeared. looking for a way to get these doors to connect and lock. Thank you -Ben

I'm looking for a replacement for this tan Milgard sliding patio door handle/lock set. You press the handle in to engage the lock rather than containing a separate sliding lock mechanism.I believe this is the Milgard Smart Touch patio door handle

Aloha,See uploaded photo of handles and mortise. Mortise is inside of glass door and not sure how to remove. Only note on handles that is was made in New Zealand.Right side of lever in photo latch is broken and believe this was the lever to lower the door latch. Left side of handle / lever is the ... (cont.)

Could you tell me what the body part of this locks height is - the part that slides into the opening of the doorframe and what the hole dimensions are between each other?. I have a Mildard door and my opening is 3 inches.

I have a door with what appears to be the equivalent of your 82-080 handle set (see photo). I would like to convert it to a locked handle with your 82-081. The existing mortise lock looks like your 82-268B. 1. That mortise lock has a 7/32" square drive. For the keyed handle, it seems that I ne ... (cont.)

Sliding glass door lock set 6 5/8"MNN

Will this work for the milgard patio door? It measures 1-1/2? thick. Do I need to order 82-310 or does 82-081 come with the key lock? Is there anything else needed to convert the current door to be lockable? Thanks for your help!

Hi,I need to replace the 82-268B but the old one does not just come out through the hole in the side of the door like it does in the 82-218 because the 82-268B is wider than the hole in the door. How do I get the old 82-268B out? Is there a "how to video" you can point me to?Thank you,Dan ... (cont.)

The entire lock mechanism and handle needs replacing.I am unsure if the key works the outside lock, but that part may remain the same if needed.Please help me identify which replacement parts I need.Thanks,Stacy