Viewing all customer Discussions for:

Door & Window

I am looking for this wheel set for a 1960's patio set.

My channel balance is 28 inches. The ends seem to match, but want to know if 004 and 005 are different. Also, my stamp is 27 C.

I have a patio door lock like the one in the pics I have attached. My desire is to have a exterior lock on it so I can enter from the outside. I was wondering if your 82-002K or 82-306 would work for my purpose. Thanks David

I need to replace the balances in my PMT single hung, non-tilt windows. The existing balance measures 27 inches x 5/8 inch using the method shown on your web site. The distance from the existing screw hole that fastens the balance to the bottom of the window is 53 1/2 inches. If it isn’t lon ... (cont.)

I've attached pics of a roller assembly, roller and axel from a 1950's 8ft double slider (both sides open & close). There are no markings of any kind. The wheel is 1.25" in dia, .25" wide, and has a center hole of .25". the axle is 11/16". The main body of the assembly is 2 13/16" long and 1 3/8" ta ... (cont.)

My spiral balance measures 29" your list of balances that you don't list a 29" length, do you carry them?

Hello. Not a first time I'm replacing ballast, - but every time I'm having issue to find a right one . Now I've got Andersen Ballast C35 6#23 5-77 . Any ideas about replacement? Thank you Regards JS.

I need an Anderson sash balance marked 11600-2, it is also marked f8 9#27 481. I need both the left and the right balances. What parts do I order?

29 inches long, 1/2 inch deep and a 1/2 inch wide markings 2900 BSI LD

We think to be an Old kk (Kolbe) Viewport sliding patio Door (1988). We measured the latch assembly to be .75" W x 4.375" H x 1.19" Deep. Screw hole Centerline is 3.5". The "L" is .75" to 1.0" depending where you measure. The centerline of the mortise is 3/4" from the inside door surface. W ... (cont.)

I have a. customer that has a Caradco casement window operator that is missing some parts. As far as I a tell the only part that I need is a 39-510 bracket. But from the attached photo the is an additional bracket with a post mounted to the sill that does not have a rod attached to it. It looks lik ... (cont.)

1800J Single Hung Window. Window # 18R71018U8-AH05. Plygem is the parent company for this window product. The window that I have is a Patriot Window. I am looking simply for the Pivot Lock Shoe for this window product.

We need parts for 2 Creation Windows that were installed in a New Era home in 2000. The tags on the windows show the following information: Series 3000 SH AAMA NWWDA 101-I.52-97 H-R25 46X68. Serial #430-230-133 and Serial #430-230-141. I called our home manufacturer and they gave me your infor ... (cont.)

Hi, I have identified my balance - 27" Series 385 Channel Balance Product Code: S385-27, but I am not able to weigh the window. Stamped on the old unit is- "26 5 EW CMC 11" Is it critical to know the exact weight? I am guessing around 20 lbs. Thanks,Larry

do not have manufact name but number on bottom of control housing is 40055. see atached image. gears are stripped and need new unit thanks David....

Total window is 36x 36 (2 panes) late building built in 1972. no markings or labels but from previous pics could be ALENCO. need to replace balances, but first need to get sash out to access balance. How do I do that, ie. do I let go top and bottom of balance on both side first to remove ... (cont.)

What pivot lock shoe should I buy? Please see the attachment. Thanks MD

i need two channel balances stronger than S385-34 option 3340.window comes down on its own. what info do u need for me to get the correct strength tension

I need a replacement outside and inside handle for this. MFG of door is unknown, its aluminum and unpainted. Can you supply me with a replacement for it? Black would ideal or even Nickle

I don't see bold numbers like 531 in your example but I found this number. 11600-17 Does that help?