Viewing all customer Discussions for:

39-089 Window Dyad Crank, 5"

Hi: My crank broke on the left side. The part that mounts to the window on the inside broke off. It looks at LOT like this crank but the arm is much longer, like 12.5 inches. I believe this one will work, however, but does it come with a longer arm? Is there another model you can recommend? I think ... (cont.)

Looking for part of the hinge mechanism to be replaced right where it's rusted it snapped off completely at the bushing

Hello.I'm looking for a replacement as the screw holes in the body have striped and been tapped several times.The body is 5" wide from hole to hole and the arm is 3.5" long (past the pivot point). The arm from the crank to the appears to be 5". The only marking on this is: US PAT. 4505601.There are ... (cont.)

Do you carry a window crank with a 4 7/16" arm? The piece I need looks like your item # 39-089. The only difference is that the 5" arm is too long. (The distance between the screws on my piece is 5")

Trying to find Casement window operator.

I have a double casement vinyl window. The hardware is stamped Truth. The stud bracket mounted to the window is flat and is 8 inches in length. On the window pictured the stud mounted to the window is rusted off. I should probably replace all the hardware for both the left and right windows. The len ... (cont.)

Something inside is stripped. Can't open the window for the first 3 inches then can't close it for the lsat bit. Have to use hands to open and close.

Could you please help me find the crank I need for this Traco window. I tried the 39-187 but it wasn't closing the window. The zigzag arm is a little bit longer on the old one.Thanks

I need both hand cranks. The picture supplied is of the crank for the left side window looking out from within the home. I believe I am looking for 39-187 & 39-188 but would like a confirmation from your experts. Thanks Jim

The brand of the casement window crank assembly is Truth. The part that is damaged is the black piece and attached metal glide (shown in photo) that ties in the lower hinge of the casement window to the installed to the track appears to be damage/cracked due to use. It jumps from the track. The b ... (cont.)

I have a customer who needs a right hand and left hand window operator for the old M & W vinyl clad windows. The size for both windows is 2850. He is in need of all hardware, handles, covers, locks, and operators. I was sent here from Ply Gem Windows.

I am buying the 39-089 operator. is the handle included

Hi, have a customer who is missing the crank and lock assembly on a roto window they have. The sticker inside the window has the following numbers. Factory order# 46831 Window order # 2523 Also has 1H9E 110-692194 Thanks

Hi can someone please help me identify this particular reel as shown in the pic. Thanks a lotDAN

the latch on this window broke and the crank is stripped. I don't see any identifying marks on the window. Can you help?

Good morning.Looking to replace both left and right crank out window handles.The brand is truth and windows are from house built in the 80's.

The window crank has faded numbers on the interior they are "30_ _ 6 ". Can not make out the two numbers or letters inbetween. The front says "G Truth". We got the bay window 15 years ago.Here is the part I was sent but it is too long (4in) for the window (need 3in)The part that i received is exactl ... (cont.)

I bought the 39-089 operator for the window pictured but it doesn't close the window all the way. Did I buy the wrong operator for that window and if so should I buy the 39-187 or 39-188?..

Hello, I am looking for 2 of these casement operators (Left and Right), any help would be greatly appreciative. Thank you and stay safe.

The screw holes on this are the right distance apart to replace the existing piece I have, but the other 5 in segmetn shown here is only 4.5 inches on my existing piece of hardware. Will that be a problem on my window, or just allow my window to open a little farther? I'd add photos as well, but m ... (cont.)