Viewing all customer Discussions for:

15-046 Pivot Shoe, 1/2" Thick

Bought at Leeds Building Supply in Macon, GA in Jan 2002. Company closed. Windows were from a company in Texas.Scott

It looks like my pivot shoe is #15-046. It's definitely thicker than 3/8 but not thicker than 1/2. Trying to also find bottom weather stripping. It has an adhesive backing, and I don't see anything like that posted on your website.

Hi. I need to identify these ballance sprin shoes. I dont have any info on the brand of window. It is a double hung vinyl windowbwith spiral springs...cann you help?

Hi. I need a replacement balance for a tilt window. It looks like your 765 balance and 15-046 shoe. My problem is I cant figure out how to remove the broken shoe. Photos 1 and 2 show the bottom and top of the channel. Photo 3 shows the unbroken shoe on the other side of the window. There's no ... (cont.)

I need this type balance 27.5 A23U CMC with the ends pictured also.

Hello! I have a set of old windows and am looking to replace the broken shoes. I was unable to find any numbers on them. Is there other information that would be helpful? Many thanks, Wellesley

Looking to replace the tilt window balances and the part that the tilt works upon

pivot shoe measures 2" tall, 1.25" wide, and 0.5" deep which item will replace these?

Hi, I'm looking for replacement pivot shoes for this window. I believe it is Silverline Window company. I couldn't find the part on your site. Thank you.

Please help me find parts that will work for this window and provide pricing. my mistake the diameter of the rod is .560 inch and is out of round. thank you

Bottom glass of the window: Spring tub length 37in. Tube diameter 1/2 in. Pivo shoe length 2in. Pivot shoe wide 1-1/4 in. See picture. Part Upper glass of the window: Spring tub length 35in shorter then the lower glass Others measurements are the same as the bottom one

Hello need the following: note this is for Marvin windows 2 of the pivot shoes part number is seen on one of the photos 2 spiral balance (see pictures) 28.5" long 2 tilt sashes ( see pictures) 2 replacement latches and replacement bases Thanks, Todd

Images show balance and shoe. Sleeve of balance is 21". Window height are 41". I did not see a color at the bottom of the sleeve.Shoe size is 2" tall x 1 1/4" Wide x 1/2" and the color is blue.PLEASE HELP!Carmen

ballast and pivot shoe for vinyl tilt out window here are three pictures of the shoe my measurments height 1" 15/16th thickness 7/16th width 1"5/32 the ballast are 3/8 inch by 21" with a white cap my name is Phil. thanks for your help

Dear SWISCO Experts, Can I ask your help for identifying the window spring? I have non-tilt windows and I think I need to replace the spiral window springs. I have multiple windows that does not stay up. The length is 29 inch, upper side diameter is 3/8 but the lower side of the pole has some meta ... (cont.)

My spiral is 28" with orange cap 5/8 thick. Need accompany pivot shor. Bottom sash only tilts. Height 2 1/8" Width 1 1/4 Thickens. 1/2"

27 inches long Blue tip 1/2 inch with on tube I also need the shoes as well and if possible the locks for the windows

window is 23 years old, I have the same problem in 3 windows, I have new spiral rods purchased from you a few years ago

Hi morning looking for pivot shoes for 8500 tilt windows measure 1/2 thick x 1 3/16 wide x 1 15/16 long pic attached. Thank u Ed

In 2004 I bought a Grand Horizons double hung set of windows. Actually 3 houses worth. We were cleaning a bottom sash and slipped and the part that holds the right side window in place allowing it to tilt snapped back in it's track and broke. I think it's made by Amcraft but not sure. I can't fi ... (cont.)