Viewing all customer Discussions for:

15-046 Pivot Shoe, 1/2" Thick

have double hung Reynolds Windows American Classic . I need the part in the picture. It fits in the frame on both sides. It is a part that attaches to the window spiral tilt balance and allows the window pin to enter and connect to it. As you can see the round part where the pin enters is keyway li ... (cont.)

Hi, This is a double hung vinyl replacement window I need this part in the picture . Thank you Sandy

Please let me know what style of pivot and bar this is from your stock. I do not see a similar pivot with metal "claws" or an adjustable style pivot bar

Pivot lock shoe. I believe the measurements to be 1&1/4"x 9/16 x Approx. 2" tall

while searching online, I came across you guys. I can go back for better photos. 8 out of 10 windows don't stay up. apparently the balance popped out of shoe. Q1 can you tell by the photo which shoe I would need? also the spiral is 29 X 5/8 (rough est w/o removing). Q2 is the flat end (bottom e ... (cont.)

Good day. Your website is excellent. However, I'm not sure what size pivot bar to order. One of them is rusted out. Also I measured the width of the silver tube that holds the spiral balance and it appeared to be 5/8 wide. As you can see in the photo, the overall length of the balance is just over 2 ... (cont.)

This house was built in 1992, I am sure these are the original windows. Every window will not stay up. I can not tell how to remove the part that slides up and down. Several have broken pieces. Can you help?

The one I think I need your part number 15-046 On the one I have there is a number 550C It is 1/2 deep 1 1/4" wide and 2 1/4" tall the hole for the window Bar loos to have some wear on it the measures i come with for the hole is 11/32" wide 7/32" tall the small tap looks to be about 3/16" wide i ... (cont.)

Hi, I need a the seat at the end of the balancer and the post that is attached to the window that goes in to the seat. Thank you, Sarah

It?s the bottom of the spiral balance

I have a number of vinyl replacement windows in my house. Unfortunately none of them show a manufacturer or model #. A number of windows are missing the round piece shown in the capture.jpg file. There is a metal piece stick out each side of the window that slides into this white round slotted piece ... (cont.)

Trying to repair a few broken vinyl Windows and I would like to replace these

Hello, can you help me figure out what part I need to replace this? Thank you, Courtney

Hi I am needing help ordering parts for two of these windows both with the same problems staying up. I need (4) counter sash balances, (2) left, and (2) right. Also (4) spiral balances total. I have only these three pictures and the information given to go off of for a client that needs these fixed ... (cont.)

Need help finding a comparable lock show for my window. My broken shoe is 2 inches long and 1 1/4 wiide! I don't see any identifying marks or numbers on it My name is Travis

Centex built home during the 90's Top portion fixed. The carriages/trolleys are broken off from the fixture (spiral wire). can they be replaced and if so what instructions?

Need 25" x 5/8" Yellow Spiral Balances for 31.5 lbs Vinyl Windows Did the black replace the yellow? These windows are about 25 years old. Thanks

I dont see any markings. I am a carpenter but cant seem to find an exact match

Good afternoon everyone,could you identify this shoe for me. This was sent my a service person at a management company and asked for my help with this part.

Hi I have a hang window non tilt. one of the parts is broken which caused the top half of the window to slide down. I'm try to order replacement parts, but I am not sure what the part is call, i have attached some images. can you please help? Thanks, Steven