Viewing all customer Discussions for:

15-046 Pivot Shoe, 1/2" Thick

I ordered the 15-015 balance block for my aluminum track windows based on the color (blue). They don't fit so I have now ordered four 15-046 (beige). The 15-015 could be forced into place with a rubber mallet but is too tight to move up or down. I will need to break it out with pliers or sc ... (cont.)

Hello, I need both left and right side of these items pictured. This is where the the spiral balances mount to the bottom of the window. The spiral balances used are 5/8 diameter 600 series balances if that helps. Thank you for your time. Chris

We need to replace the balance spirals in the windows at our school. During our local research your website was suggested. The pictures and description of the three options you have don't seem to fit the ones we need to replace. I've attached photos of a spiral from our windows and then a photo of ... (cont.)

Hooks to window to hold Rod to window and window up

I've got an Alcoa window that won't stay open and wanting to purchase new window balances. I've taken a couple shots of it and attached them. The plastic cover is off in the pictures, but it can bee seen to the side. I've also attached a picture of the pivot shoe, if you think I should replace th ... (cont.)

Dear Sir: Could you take a look at the attached picture and tell me which balance shoe and pivot bar I should purchase from your website. I know I need Spiral Balance Charging Tool for Tilt Windows (75-006). WD-40 may help to take the rusted bar out, but any suggestion is highly appreciated. T ... (cont.)

Series 1600 windows. I believe I need part 15-015 . Please look at attached picture and advise. Regards, Pete

Hello, please search to see if you have or can locate this part. I need about 12 or so. Thanks

I

Hi, I have vynol folding widows and most of my shoe pivot are broken. Trying to figure out what size I will need. I supplied a photo. Hopefully you can help me. Thanks Antonio

I am looking for pivot lock shoes for 6 of my double hung titled vinyl windows. First I will like to know how do I get the pivot lock shoes out so I can properly measure them. I have reviewed your video where I see Mike replace the tilt window spiral balance, but did not see Mike take out the shoe. ... (cont.)

Hello, I am looking for the plastic accessories or parts for my double hung vinyl windows. The actual spiral measurement is 28 1/4 length by 3/8 inch. I have uploaded two pictures. I double checked and made sure the spiral is not broken, but the plastic part is which is connected to the bottom of ... (cont.)

I recently purchased 46 Pivot Shoes, Item Number 15-047, as replacements for my vinyl tilt windows. The windows are single hung, therefore only one sash tilts out. When the pivot bar is inserted into the cam and twisted, similar to that which will occur when the window is tilted outward, the sm ... (cont.)

The pin that connects the moving window to the pivot shoe has broken on many of my windows. What should I order? Is the stub romovable and replacabel? I appreciate your help. Stephen

Hi, I need help identifying the part that attaches to the bottom of the sash spiral. The part that the sash pivots go into. The first picture shows one that is not broken.. the one on the other side of the window is broken. Thanks, Buzz

I need to replace some Pivot Shoes (see picture)on vinyl windows manufactured by Atrium in 2003. I will also be replacing Pivot Pins (see picture) which I have identified in the Swisco catalog. The balance the Pivot Shoe will attach to is shown in one of the pictures as well as the opening in the ... (cont.)

I am searching for Traco TR-5000 balance shoe, sash plunger, sash plunger hook and sash plunger springs. Do you happen to have any of these in stock? What would the prices be on each if you do have them?

I am trying to find the manufacture of this window from 1997. Your pivot bar 3 in. # 26-040 is the same as this unit. Thanks

unable to find markings

I have a customer who has season all windows and have a few questions for you. 1. the piston is junk and needs replaced, it is gummed up and pulls apart when trying to move the piston up and down. so i think i need one of those, the piston measures 34" long when opened up. 2. i need a screen ... (cont.)