Viewing all customer Discussions for:

15-046 Pivot Shoe, 1/2" Thick

HiWe have older Imperial brand windows and need some components to. The spring that balances the vertical slide window broke on two windows and I am trying to locate replacements. I would purchase 4 if possible.ThanksJoel

Hello,Just want to replace my 25"x9/16 blue tip spiral balance and this pivot shoe and wanted to know if you have this replacement shoe in your stock (so 2 spiral balance and 2 of these pivot shoes ia what i need) Regards, Joe

Hi - We would love some help identifying the parts needed to repair this window. The glass was replaced a couple of months ago. Just recently the top window slides down. Can you let us know which part we would need to buy to fix it?

I believe this block and tackle window balance uses a 1/2 inch pivot shoe. Please recommend the correct parts. Maybe I can switch to a spiral balance? Also, I will need a sash stop to fill the cut I will need to fill the cut out in the window track that will be necessary to remove the old pivot sho ... (cont.)

Need part numbers to order I don't see the exact item

i know there is not much to go on, but take a guess

You're recommendation for latches and shoes

Hi could you help me fine these two parts for my vinyl window

Trying to identify this pivot shoe. It is 2-1/8" tall by approximately 1" wide. Thanks.

There are no part numbers on any of the parts I have. The parts are the springs that lift and lower the window. The spring loaded clip that allows the double hung window windows to flip out from the window frame. And a bottom guide that the bottom of the window sides up and down upon, and allows ... (cont.)

I'm looking for replacement pivot shoes for a 9500 series window I bought fron HomeDepot over 15 years ago. I do not see any slots to remove/add pivot shoes, Instead of trying to spread the window frame I am thinking about triming the frame to get the pivot shoes replaced. I have done detail work l ... (cont.)

Single hung Vinyl window with a broken Pivot bar and pivot shoe, as seen in DNCN0556. The window is original window installed in a new house by CP Morgan Home Builders (now defunct). The house was built in Greenwood Indiana in 2006. I have no idea who the window manufacturer was. All that I kno ... (cont.)

Shoe is 2"x1-1/4x1/2. Channel (bar)is 2-1/2" with one hole in approx the center.

Looking to identify this shoe for replacement. It is 1/2" thick. 1-1/4" width, looks like 2" in length. I think its 15-046. Your recommendation?

This came out of an 30 year old vinyl window that did not have a manufacturer's label. It has a red tip. It is 30" in length and appears to have a 5/8" diameter. My sash is 18 lbs. The space between the end metal tips is 1/2 inch. Is this a S 600 30" spiral balance. I will be attaching it to the 15 ... (cont.)

here are pics can you help

The second photo is what my windows use. Could you let me know if it is the same as the one in the first photo (the dimensions are the same)? If not, what is the right product? Thanks.

Hello and thank you for your time. String broke on both sides. Need replacement for each. Regards,Craig.

I need to replace the mechanism for both sides of the window. size is 27 5 GV CMC 1.

We have a broken pivot shoe which the window-expert in Home Depot advised we can only get online. We want to make sure we get the right part and can't seem to identify a match online. Our windows are ancient so I'm not sure if maybe the part has just been updated visually but functions the same.. pl ... (cont.)