Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

Good morning! We are renovating an old church and they have Garadco parts. What do I need to do to replace this, or what items do I need? Any help would be appreciated! Thanks!

Per my contacting your customer service regarding the two window handles received and the one that is an incorrect fit, I was advised to send comparable photos of our current closer with the one that was sent. Attached are the pictures and order info. The two operators were for the same window uni ... (cont.)

The arm of the casement window operator keeps falling out of the window sash. It is a left-hand window. The length of the arm itself is 9 inches. What do I need to order to replace it?

I measured and the short arm was 3 3/4", long arm was 9 3/4, track was 11 3/8 with 4 screws so I was able to find that. From the outside, ash shown in pictures, the window opens to the right. What operator should I use?

Looking for a left and right operator. Cover looks like a truth operator. But one of the arms has like a "S" curve in it. Please see pics.

Hello! I am trying to figure out what hardware this is, the chrome is pitted and I would like to replace the chrome items with a bronze to avoid a repeated pitting in the costal condition. Can you please help me identify this hardware? Some of the windows have a truth logo on the armature, but I can ... (cont.)

Hi, I'm trying to figure out which type of casement window window opener i have in order to replace it. I know it is a Truth Hardware item, it opens Left and the so line on the handle and shaft are stripped. I have attached some photos for you. Please note that the photo of the window in the open p ... (cont.)

Lincoln Window. Gut of crank seems to be stripped. Cannot close window must manually push shut to close and lock window. Extended double arms measure approximately 17 inches. (my best measurement) Thank you for your assessment!Alice

Hello,The cylinder broke off of my Nuprime window hardware and I'm hoping to find a suitable replacement. The base plate is 2-1/8" x 4-7/8" and the arm lengths are 3-1/2" and 8". The color is beige. Can you provide me a suitable replacement for this?Thanks,Jed

Hi. Can you direct me to the correct part? I think I need at least three handles. I am not sure if I need the actual crank until I get in there. Are parts returnable in case I overbuy?

These are photos of a working assembly. I have several assemblies that are rusted which causes the window to deform out of square when open and close incompletely. The lower post/hinge of one is rusted through. Thank you Mike

20810A

Hi not sure what model I need for this.Can you identify should be a right-hand crank i believe.#30710 number on the body and #20755 is on the clip armThank-YouBill

Hi! Trying to replace these! I measured and want to make sure to order the right parts! Thank you!!!!!

Window will let out but want retract. Handle just turns out of the crank.

This is Truth hardware for Marvin casement window. As shown in the pic, I need the cog that goes in the opening and then the crank handle fits on that.

The handle doesn't close

The rank on my window is starting to grind and it close the window completely. I want to replace it before the windo will not close anymore.What is the part # and price for a replacement crank assembly?The crank arm mechanism has a code of 20755Thanks

Dear there, I looked at your website, and found my window looks like casement window. Currently my window opener is broken (I can open the window, but cannot close it, the handle will be off when I close it. See the attached pictures. Could you please which parts I need to buy? Thanks a lot! Jon ... (cont.)