Viewing all customer Discussions for:

15-104 Caradco Friction Shoe

We have more than 20 years old window from JW custom windows. We do know what kind window shoe to order because it is broken.

I am looking for white vinyl jamb liners for 1988 vintage aluminum clad wood windows. I can't find any manufacturer name or numbers. I have 13 windows. The jamb liners are 3-3/8" wide excluding the small wings on the outside edges. The photos are of a liner that is 54-3/8" long at the long edge. Ten ... (cont.)

Only markings are tai industries on screen and ttt cba 11-97 between window panes. It is a vinyl clad Wood window double hung. The width of the slide is 1/2 inch by 2 1/2 inch high

Crestline wood ext./int. double hung, double pane kitchen ground level window. 20 7/8" tall, 34 15/16" wide viewable glass. The home is OLD, so am I. NO tilt. NO I.D. number on metal glass spacer. Color of shoe is pastel blue or lilac, and it attaches to the spring loop. I have attached a pic of t ... (cont.)

shoe to a spring in window sash

I did not see any part numbers.

need a replacement

Hello this is a pivot shoe from my window. its broke at where it hooks onto spring. i super glued it together so you might recognize the part. i doubt if the super glue would actually work. I think this window was called the Quaker Phoenix. I have two broke pivot shoes. Ive been told you made the pa ... (cont.)

This slides in the sash liner. It hooks to the spring. I think a hook of some sort broke off the bottom of the guide.

Not sure how to order these parts or what I'm looking at

I'm looking for a tool to open up the jambs so I can replace the friction shoes. Do you have anything like that?ThanksJeff

Hi. No labels or Id on frame. Pic of glass included. Looks like a balancer shoe that I've never seen. My client has a bunch of broken ones.

These sash balances are very basic. Behind my jamb liners are two springs attached at the top, one for the upper window and one for the lower. The springs clip on to the top of the jamb liner, and a plastic slide is clipped on at the other end. The plastic slide pieces have broken in nearly every ... (cont.)

This window pivot bar (I think this is the correct name for this part) is broken on most of my windows. There is a 'hook' part that connects my springs in each side of the window. The 'hook' part has broken off the plastic pivot bar. I would like to find a replacement (preferably metal) so my win ... (cont.)

Need at least four of these "spring slides"

Pretty sure windows were manufactured by SNE Enterprises Inc (Mosinee, WI) and they closed down years ago. I removed the jambliner and attached photos. Let me know if you have the parts and feel to call me if you have questions. Thanks.Owen

This fell off of one side of a double hung window and broke. I need to figure out how to get a replacement part.

spring is 22 inches long and about 5/16 dia There are 4 springs and guides for each window

See attached. I am looking for the piece that slides up and down in the track on my Tilt windows. It attaches to one end of a long coil spring. The other end of the coil spring attaches to a hook. There is a pivot pin sunk into the side of my window. That pin goes into the hole in the piece that sl ... (cont.)

I need to replace a friction shoe using SWISCO product code 15-104. The vinyl jam channel where the shoe is housed is 1/4 inch wide, which I need to spread open. Will the 75-069 jamb spreader fit into a 1/4 inch jam channel so I can avoid cutting a notch into the vinyl jam?