Viewing all customer Discussions for:

15-118 Pivot Shoe, 9/16" Thick

The window says Cavco on the locks.Both shoes are broken.Are you able to tell which shoes I need from the attached photo?Best regards,Jonathan

The first photo is Pivot Lock Shoes for the double hung window.The second photo is sash balance: the length of the vinyl tube is 32".

Looking to replace the pivot locks on the windows the home I board I'm not sure what company they are aluminum windows see the attached pictures. I placed an order (1126440)for the 15-047 and the 15-154. The blue pivot lock was just a little too loose in the channel and the black one the lock was t ... (cont.)

Looking for these pivot shoes not sure if they are left and right handedWhat Pivot shoe do you think I need to order?

Looking to find replacement parts

This part is approximately 1 1/2 inches wide and 2 inches tall and 5/8 inch thick

The picture is of the clip still installed in an existing window

I am looking for a replacement balance shoe like the one pictured. It is 2 1/8 inch long, 1 1/4 inch wide, and 9/16 inch thick. Thanks

I'm missing some of these entire balances, Some of them only the coil and the blue circle.

I need a replacement pivot shoe with measurements like your no. 15-118. The only difference I see is this one has a blue cam whereas mine has a black cam. Does that make a difference? I will be using your pivot bar 26-083 and a new spiral balance S600-25 blue tip for a 25lb sash. Thank you ... (cont.)

Hi can you identify the replacement pivot shoe for me please ? I sent a picture and the number on the part is 505C. I was on your site and I need to buy replacement spiral balances, and my pivot shoes seem less than ideal. The metal component has come off ( though I was able to put it back ) but in ... (cont.)

I have identified 15-118 as the pivot shoe I need. My version has a screw apparently to tighten the grip on the tip of the balancer or to keep it from slipping out. I have sent a picture of the screw on an installed shoe Also sent a picture of the broken shoe with the plastic broken where the screw ... (cont.)

Hello, Your 15-015 has the right outside dimensions, but I'm not sure about the size of the pivot bar pocket. My pivot bar has a stamped U shape, 0.315 wide by 0.190 high. The pocket in the shoe is about .33x.22. Will the 15-015 accept the pivot bar I have? Also, my spring balances are unlike anyt ... (cont.)

Dear Sir: attached are pictures of window pivot block I need. It appears to measure bout 2 14" long by about 1/2" thick. Please advise as to which part I need so I can order. Thanks. Don

I am looking for pivot shoe, spiral balance and sash end stops for the traco window pictured here. I believe I have identified the S600-17 as the correct balance (white tip for a 17"x36" sash, the 9/16' 15-118 pivot shoe (my dimension look like 5/8" by 2.0"x1.25" so maybe the 15-105 is also a poss ... (cont.)

Good Day, I have a spiral tilt balance shoe that I am unable to match. I saw a similar one on line that you matched up and I have attached a picture with writing that is mine. I hope you will be able to tell me what part this is.Thank youCathy

Shoe measurements: Lenght: 2 1/4 inches Width: 1 1/4 inches Height: 9/16 inches Grove devuce lenth: 1 1/16 inches Grove device width: 1 inch Grove device raised appendage heigth: 1/4 inch Grove device raised appendage width: 1/4 inch

Is 1 1/4" wideby 9/16" thickby 2 1/4" longnumber550 stamped on it

We need a couple of these pivot shoes (part# 590CSB). House was built in 1998 but there are no labels on the windows that identifies the manufacturer. Hopefully you might be able to assist us. Thank you!-Steve T.

I need two of these. They are installed in a Huron double hung from 2001