Viewing all customer Discussions for:

15-144 Coil Bushing Cap

My springs broke in my windows. There are springs on each side. I checked your listings and I think my pivot is a 15-141 but I do not see the springs. The photo shows my hardware. Note broken piece and notch. What parts do I need? Thanks Jim

Please advise on all parts needed and part numbers to order. To allow this window to stay in the open position

Hi, Please tell me what I need to order. I am replacing all the parts. I was unable to find any numbers or markings on the old parts. Thanks for your help! Carrie

Good Morning, We would like to order 4 dozen each of the Coil Balance Shoe, Coil Balance Bushings, Coil Bushing Caps, and the Coil Support barrel. Pictures are attached of each part. Please confirm the size of the Coil Balance Clip. Per our measurements it is 1-1/4" and the coil support barrel i ... (cont.)

Hi, just got off a call with support and sending in pics per request just to make sure I am getting all of the right parts. Pretty sure I need 2 shoes with part 15-175, but not sure about the coil size and coil bushing and coil barrel. I am guess I can reuse the barrel, but not sure about the bush ... (cont.)

Good afternoon,I am looking for replacement parts for double hung windows. I believe one of the parts needed your company has it as product code: 15-175 the picture labeled as Z5Window part I.The other part II need assistance in identifying it, picture attached. Picture labeled Z5 window part III li ... (cont.)

Hi I'm looking for the top latch as well (x2) as welll as the coil mechanism on the sides of the window ( x2)

i need these parts traco windows can you help single hung apartment complex i would need to replace alot of these

Looking for a few coil springs for an Alcoa tilt vinyl window. I had previously replaced a couple of the pivot locks, as shown in the picture and now new new coil springs. Let me know if the picture is enough.ThanksKeith K.

Hi there, I have a vinyl double hung window that does not stay open. Upon removing the sashe I found the springs on both sides broken. The springs are 1/2 inch 7 lb hook end that I could not find anywhere. I wonder if I can use your S152-7 instead. Also, the balance shoes are plastic closed rectangl ... (cont.)

hi I need to replace single hung sash window single coil balance, window weight : 18.10 lbs window size : 24 1/4 inch (w) x 28 1/2 inch (H) notch size (inside) : 1 1/4 inch + question: should i choose 1 pair of 9lbs balance or 10lbs balance thanks Ran

Need replacement for both left and right coil spring balancers. 2 coil springs per side. Stamped on coils is a #5 (left coil) and #4 (right coil - snapped off). No other identifiers on any part. No identifier of window brand on window. Spring is 1/2" deep. Sash carrier is 1-1/4" wide x 1-1/2" tall x ... (cont.)

Hi. Our windows are about 24 years old. They are in great shape, but the internal plastic parts have become ridged and break easily. That?s especially a problem with the rotating mechanism that attaches to the coil. Many thanks for and help you can provide!

I need to replace pivot shoe and coil balance for my tilt window. Window weighs 17lbs

I own a 15 year old house. I do not have any information on the window manufacturer. There are not any numbers on the window nor the balance itself. It is a coil balance yet I will gladly do a spiral balance if necessary The window is a double-hung with muntin bars inside of the double pained gla ... (cont.)

I can't seem to find the right spring cover, the one I have measures 1 3/8" high-1 1/4" wide, and 9/16" wide, will also need the right barrel for that as well. All the ones i see are almost an inch deep, not sure if those will work. Hopefully the measurements will help.

I need 3 sets if CV BAL and corresponding shoes, fir a 14 lb sash. pictures to follow. I also need 5 sets of insert tilt latches. I recently purchased some but they were too small. The ones I purchased were 26-266 and 26-267. These were smaller than I needed. The size I need is 2 7/7 long. The "T" i ... (cont.)

width 1/2 inch thickness 2/128 inch stamped # 8 have a slot to the side as in the photo window is vaynal with 27" hight up and down movement. this windows are Weathercraft company production.

They have a 4 marking. Please advise. Kyle

I a searching for replacement balance parts for weathercraft double hung window.The aluminum Between the glass has weathercraft 94 stamped into the aluminum as seen in one of the art at bed files. I am trying to replace ALL balance parts for both sash in one double hung window. The exposed glass mea ... (cont.)