Viewing all customer Discussions for:

15-144 Coil Bushing Cap

I have older vinyl windows that have had the coil balances fail. I need to replace these. Some are double coil and others single. There is no service opening to remove these. I will have to cut to remove and replace. But need help finding the correct parts. I've included three pics showing what I h ... (cont.)

Coil Blanace

The windows are DH in a modular home built in eastern PA. The shoe is 9/16" thick x 1 1/4" wide. The window is about 38 x 56. Another window with single coil is 29 x 36. Sorry, I did not measure the coil balance, but I will need them also. I did not find any identifying numbers.

I have a broken coil spring on vinyl window. I have 2 photos of the window with existing hardware before broken coil was removed and one of the broken coil. If possible, could probably use replacement plastic hardware as well as the coil.

Hi, I am trying to replace a broken window coil balance spring (see attached images). From the broken pieces, I believe I am looking for an 8 lb spring. Could you help me identify the spring needed? thank you

Coil that has a #5 on it

I'm looking for four each of the pictured Pivot Lock Shoes (I believe that's what they're called?. I have around ten windows I will be refurbishing in this apartment, and eight apartments in total. I'm using a Jamb Stretcher, which so far is working ok. thanks a lot

I have some photos and need help look for a replacement

Hello. I need help figuring out which parts and correct coil balance weight for my window. The metal coil has the number 540 stamped on it. I hope that helps. Thank you very much! Allison

I have no idea what to replace this with any help is appreciated. Thanks Anthony

Hi, I am looking to get five sets of parts see submitted photo. Thank you.

I need help identifying the manufacturer and/or replacement for my coil balance.

I'm looking to replace all the components (coil balance, pivot shoe, support cap, flange, and barrel) for my Weathercraft vinyl window (44" width, 22" height, 28Lbs). Please provide guidance on the following: 1.) Part numbers to completely replace the coil and related components. 2.) Coil weight ... (cont.)

I have windows that open right to left. Each panel weighs about 20 pounds. They have three coil spring assist lifts attached in the left frame. I I need to replace coils and one of the brackets that hold the end of the coil spring.

Window parts ,double hung, made by or for Hodges Company in 2001. This window uses the "15-175" coil balance shoe, blue slate" which I have 4 in stock. The window uses a " 2 coil springs per side, total 4 to lift each half of the window. Each half weighs 25 lbs 3 oz. 2 of the springs have a "5 L" st ... (cont.)

The windows are w31 x 62 hi double Hong

These are replacement windows that had been replaced when we bought the property back in 1994. They are from the early 90's. No brand name or marking on them. We were told by a contractor a few years back they were probably from a line by Home Depot. I hope this helps!

Hi: I already ordered parts S 140-20 x2 and 26-398 x2. Not exactly like my old ones. Here are pictures of my old ones. Can you advise what I need?

I t appears to be series 150 coil balance that I need to replace but do you have the anchor bracket so to speak that holds in sash , I'm not positive of weight needed but sash is small vinyl approx 40 united inches.. thank you Ron Need for job asap, thanks again !

I am looking for a spring/coil that assist in raising the window. The one that broke is on the right side of the frame looking at it from the inside. The window measures 32 wide and about 34 high. The coil material looks like a metal band, stainless steel. IMGP2338-you can see the broken steel ban ... (cont.)