Viewing all customer Discussions for:

15-150D 1/2" Coil Double Support

I recently ordered part 15-150D to replace the pictured coil cover and it is the wrong part. There are two coils that need to be covered and it has two screws. The part I ordered is too short and only has one screw. Do you have anything to replace the pictured part?

One coil #3 and one coil #5 coils are 1/2"

I have identified the double coil balance as #801020, but cannot identify the other two parts. I also need to know if the pin can be replaced in the window as it has broken off the left side as seen in the photo 4. if so, how, there are no screws on the bottom of the window. Please advise. Thanks, B ... (cont.)

i need the coil part it says 8 on it idont know which one i need

I need a replacement balance set for a Simonton window marked 9802051110

I have 2 broken springs, no markings found on any of the hardware. How can I decide on force selection? Can I weigh the window and split it for each balance? Thanks, John

Hello, I have multiple Simonton windows (model # in attached photo) with failing coil balances. Some windows can no longer be opened and the coil spring covers are cracking on additional windows. I'd like to replace the coil spring covers, coil balance springs, pivot shoes and several damaged pivot ... (cont.)

Need the coil balancer replaced and maybe the sash tilt guides as well if you guys carry them. Thanks

trying to replace my coil spring single tilt window mechanism. photos attached. There are no markings on the cover or on the coils. The window is about 30x30.It is about 3 inches tall, 1 1/4 wide and 1 5/8 between screw holes. First pic is when it is in the window frame, but screws already removed.2 ... (cont.)

We need this complete balance assembly, pivot shoe, coil and the plastic cover. Can you please supply the part numbers. Thank you!

I have several large Simonton Windows that have broken coils. I have attached a few pictures of the broken pieces and will need to order 5 sets of parts. One of the pictures is the information for the one of the windows but all of them are almost the exact same deminsion/weight.On one of the coils i ... (cont.)

Spring on one side of window seems to have broken and coiled up on top of the piece where sash clips into. Does not have a brand sticker on window and was installed about 6 years ago.

The pieces on the top are from one window. The metal bar on the bottom is from a different window. The smaller part on the top has a pat. no. 5.704..165. They are from windows that were install in 2003/4.

Hello...looking for replacement parts for the attached photos please.I am relatively handy and would like to replace the parts myself. Thank you.

Coil support has part # 801020 stamped Shoe measure - 1 1/4" wide, 1/2" thick and 1 7/16" to bottom of curve Coil spring - 1/2" wide...has #3.5 35" p stamped in ink on coil spring.

Looking for replacements for these window balances. Size and parameters of balance given in photo

I need the replacement parts shown in picture for 3 windows on each side!

Hi. My name is Cory. I work for South End Glass and Mirror in Louisville Ky. I can't find something that matches this perfectly. Any help would be greatly appreciated. The overall size is 4 7/16. The width of the coil is 1/2". The height of the shoe is 1 9/16. The width of the shoe is 1 1/4. The thi ... (cont.)

Simonton single hung dual pane installed May 1998 tilt out feature coil spring return is broken on the left side from inside. I need the coil and the shoe.

Simonton referred me to your website for replacement springs for their single hung windows, Would you have these parts or just the plastic covers for the springs?Thank you,Daniel