Viewing all customer Discussions for:

S351-27 27" Series 351 Channel Balance

My window Channel balancer looks like it's 27 in. But this is all that is stamped on the balancer currently. What model should I pick?

Need to order this channel balance. Can you please help me identify it. Thank you.

I need balances for many windows 32-6 has metal length 33 inch 26- 5 has metal length 27 inch Also if guide me my 44"Wx35H and 26"Wx35H Window both have 32-6 balance. Do I really need Same balance for small window?

26-4 F05 CMC 43

Window balancers used in single hung Green World MFG window, Mira Loma CA. 27" metal to metal Width on front side of balancer is 1/2" Thanks for your help Dave

Do you have any of these rails? I would need 8. Thank you, Steve

Hello, I am unsure which part this would match to. I think 390 but not real confident as it is a little different. It says my windows were mfr by Gienow Building products. Length of metal part is 27". Please let me know if you need any more details or pics. Thanks!

Attached are pictures of my channel balance. Need to know which one I will need before I order. Length is 27 inch measurement. The rest is on pictures provided. Thank you!

House is from 1986 old windows. Windows do not stay up. Need new channels. Channel completely broken Part identifier - B.S.I. 26 C Channel length 27" Width - 1/2 " Window weight - 15.5 lbs

I would appreciate your opinion prior to order these, will need 30 units. The metal is 27" long and the bottom shoe is 1" so it appears that the S351 with 2640 is the correct replacement. The stamp on the metal is 2640 with a special character after the number. The 18-09 appears to be the best fit o ... (cont.)

Thanks for the help!

Looking to replace two channel balances in a non tilting window, the balance measurers 27" long by 0.5" Trying to figure out what product to order from you? IS there anywhere in Canada I can order from? Thanks for your help.

Here are photos of the window channel balance we need. THANK YOU!

Hi, I need to buy several pairs of channel balances. They are all the same length and option. So, I would just like confirmation that I'm selecting the correct one based on your expert analysis. I think I need to get the 27" Series 351, option 2630. What I have now: 2630 27" long channel 0.5" wide ... (cont.)

My name is Roman I just need a little information on the right part to get the measure meant on just the steel without attachments is 27 inches. I need four of these parts. Thank you Please contact me

26 4 Caldwell JM 27 inch

I need to order some replacement balance rods, but I wanted to make sure that I'm ordering the correct part. These are for a Linford window. The rod is 27" and is stamped with a #2640.

IS PICTURES OF ENDS WANT TO MAKE SURE IM ORDERING CORRECT BALANCERS WE HAVE PURCHASED FROM YOU BEFORE THE BOGEN LOFTS AND THE THE VENTANA LOFTS MAXUS PROPERTIES ( MAY HAVE IN YOUR SYSTEM) THE CHANNELS HAVE 4 NUMBERS LIKE 2760 2650 3470 THE WINDOWS ARE NOT TILT OUTS, NOT GROVED ,AND ARE 1/2 WIDE CA ... (cont.)

Hey I have a bunch of these balances and it's very hard to open or close my window I'm looking to upgrade the hardware

Hello, looking to confirm part required...thanks