Viewing all customer Discussions for:

S351-29 29" Series 351 Channel Balance

Our house is 20 years old and the existing balance is stamped "28 4 GP Caldwell." I'm looking at the 390 in 29" with the 2840 weight option. The bottom shoe on two balances measures 1 1/16" so I'm inclined to go with the 15-001 shoe, assuming it has worn a bit and if it binds, I can shave it down. ... (cont.)

I have a singe hung window non tilt that the channel balances are bad. Also there is a plastic (sash glide/stopper) located at the top of each window that prevents the channel balance from passing. The identification marks found on the channel balance is 28 3 HL caldwell.

I have a Jordan window. It has 28 3 CALDWELL HM stamped on the side of the channel base. It measures 1/2 inch wide by 29 inch long. The window including dram measures 33 3/4 inches. From the enclosed picture can you help me with a channel replacement and metal clips.Thank you

I bought a house with some windows that do not have balancers. The window glass is about 23" and the distance between the top balance hole to I think you call it a Yale catch is 23". Looks like a 1/2 " wide balancer would fit. I don't know if the top holes should have clips or not since they don't. ... (cont.)

Name in the channel - 28 3 CALDWELL HM measurement 29 inches between the ends of the metal

the metal part is 74cm (a little bit more than 29 inch) long, 1/2 inch wide and 5/8 inch deep. I need 5 pieces. Thanks!

The windows were made by Kinco in a home built in 1986 in Florida. I know I need several 2810 window balancers, but I'm not sure which one. Also, the part number for the sash guide / cap. Please see attached photos...

Please advise which29" series 351 channel balancer I need for a sash approx.29"high and 46"wide.Is it a Viking balance fx2830 or 2840.The internal spring length is 2830 18" and spring of 2840 is only 16,5". I like to order the correct channel for above sash. Thank you, Ulrich P.S. Have a ni ... (cont.)

Hi Guys, Thank you for having a place that identifies what is needed for replacements. I have attached pictures of the top and bottom attachment pieces. There are no flanges on them. The metal channel is 29in long. The pulleys wheels in the channel have split and broken and window no longer funct ... (cont.)

I need to confirm that I am ordering the correct window balance. I believe I need the 390 with option 2830. The length is 29 inches. Etched on the side seems to be 2830.

Hello, I did call and spoke to someone this morning. He suggested for me to look at the 29" Series 351 Channel Balance. I want to be sure this is correct part to order. It seems the top attachment is the 19-002 and the bottom shoe attachment is the 15-002 - The bottom piece is 1" across at the ... (cont.)

Window slams down, will not stay up. I have removed the two aluminum cartrages on the each side of the window. They actually fell out. one is intact, the other the string assembly has come apart from the pulleys. The cartrages are marked "28 3 C H". I need help figuring out which to order. Attach ... (cont.)

I need 4 channel balance springs I believe 351 the number on them is 2810 my windows weigh 9.7 pds (16"X 29") it measures 29" long 1/2" wide and 5/8" tall They are Jordan windows 28 years old I think the sash is a 18-166?? and I need six of these

I am sending a picture of the latch. Its white plastic. Checking if you have them. Would prefer them in metal if possible. Could you advise the part number. I have purchased other hardware for the 351 series - forgot to purchase the latches that locks the windows from the inside. Thanks ... (cont.)

I need your help to match my window balance that looke like 29" series 351 chanel balance or 29 series 380 channel balance. window is a kinco.inc the metal channel is 29" stamp mark:(2840) BS1. the top guide looke (19-002) 1/2-1/2-1 1/4 y channel balance shoe winged like (15-001) 1" I may ne ... (cont.)

Channel balance is 29"x1/2" with 2820 stamped on it. Looks like it most closely matches your S351 except my shoe and top are white. Please advise. Thanks, John

I am wanting to make sure I get the right style of window balancers for my Gapco Windows. They were built around 1985-86 and except 2 with broken balancers are in good shape so wanting to get a few more years out of them. Attached are images of each end of the balancers. I need 2 that are 25" and ar ... (cont.)

Channel Balance for 2820 (2) and 2830 (2) needed, part S351-29. Went through all steps for ordering online with measurements and specs. Am attaching photos to this inquiry to confirm parts ordered are correct - Series 351 for windows installed in 1986. 29", with top 1/2" x/ 1/2" x 1.25" and shoe ... (cont.)

Need a replacement channel balance for my non-tilting window. It measures 29" in length. I believe the ends are 19-002 and 15-002. The bottom shoe is 1" in length. I believe based on the code it is a 2860 option as well. Appreciate your help to make sure it is correct.

Good morning, I am looking to replace all my window channel balances. I have varying window sizes and I am not finding a stamped code to help me with classifying each window size. I looked all over this thing. I think I have my top and bottom config correct based off your photos. ... (cont.)