Viewing all customer Discussions for:

19-005 Channel Balance Top, Winged

Unique 28-B-20 is the marking on the balancer. Milestone single hung series 1000 windows. The bottom foot appears to be 7/8", but the only two choices I see are 1" and 1.xx". It also looks a little different than the picture. What would be the part number I would need? Or do none of these work for ... (cont.)

could you please help find which is a right channel balance for my home. I measured the old one (broken): channel balance shoe deep 7/8" (15-029?). The top looks like 19-005. The channel width is 1/2", the length 28". I need purchase 3 channel balance and 1 clip 16-002

Need a quote for (4) channel balance assys, with a 19-005 top and a 15-029 shoe (7/8"). Similar to S380-27 with option 2640, but with the 15-029 shoe. This is a Caldwell replacement with markings 26-4 GK.

Length of metal portion of channel is 16", 1/2" wide, 5/8" channel depth. Top nylon guide is 1-1/4" in length, 1-1/8" wide at tabs Bottom nylon guide is 1-1/14" in in length, 1-1/8" wide at tabs Overall length of balance is 17". I also need the accompanying sash guides, but all are broken with no w ... (cont.)

The marking is 3640. I reviewed all the measurements and they seem to align with the Series 380. The dimension that is off is on Winged Channel Balance Shoe. The 1" depth measurement is between 13/16 and 7/8" on my balance shoe piece. Will the 380 series work for me or is there another series? ... (cont.)

Need to find (4) balance rods to match above photos. Length 33 Inches long, number on side 3220 P

Good Afternoon I have attached 5 photos. The metal piece is 29" long. The bottom shoe 1-3/32" deep There is a stamp on the metal P 2830 I believe that the part I'm looking for is Series 350 Channel Balances I'm looking for the price per channel. I'm looking to buy 8. Thank you

Trying to find the correct balance/guide combination to match what was removed (2305). The bottom guide seems to be smaller than any I have seen, in particular the 7/8 measurement. Most bottom guides are over 1 inch for that dimension. The top guide I'm thinking 60-508. I have a couple other numbers ... (cont.)

I'm afraid My order may have the wrong end. 29" Series 380 Channel Balance. I am sending some photos of my track to confirm? (Order was cancelled).

Can you help me replace my window balancers. There is a 34DS stamped onto the metal channel portion of the balancer and this metal portion also measures 34" and then it has plastic parts on the ends which make it a little longer. Pics included.

Left side is up and right side is down. Plastic stop sash is broken. Window will not close completely.

ordered S710-29 , should have been s395 opinion 2840. Do you sell the pop rivets that fit the channel that the 19-005 top and 15-001 shoe uses? Instead of re-ordering and paying for shipping again I would like to use the existing ends from the old channel. Thanks for your help.

Hello , Can you please help me to find a replacement for my Caldwell Channel Balance. The channel balance measures 33 inches long and the stamp on the balance reads 32 5 GP Caldwell. The balance top on this channel has a groove in the middle.

No photos of parts installed. The measurement is 24"The channel is identified with a 2320 number. It looks just like your S380 or S385Jose

Channel series: S380 Channel length: 29 Channel stamp: 28B Quantity: 2

I need channel balances for 3 of my windows was using the website and did ok up until the feet on each side of the balance was hoping you guys could steer me in the right direction. I'll need 6 channel balances for the 3 windows and the windows down are all same size. They are starting.ped bsi with ... (cont.)

What a great site! Hopefully you can help me. I suspect one of the balancers has been replaced before. One is stronger than the other and the window needs to be giggled side to side to get it moving upward. The window weighs 30 lbs. These are the numbers on the balancers. Left- 32 5 FW CMC 10. Right ... (cont.)

I have a Caldwell channel balance marked 30 3 BN Caldwell. I don?t seem to be able to find a match on your site. Mind has 19-005 top. And 15-029 bottom. 31 in length. Wings are 15/16 in wide. Bottom shoe is 7/8 in depth Please advise. I would need 6.

I need a 30" Channel Balanced labeled 2930

these are stamped 2960.