Viewing all customer Discussions for:

19-005 Channel Balance Top, Winged

I have the same problem. Channel balance marked 3650 BS!. I need two for the same window. I have attached photos The bottom measures 7/8". Can you help me?

Help to select the right Simonton Window Non-tilt, ChannelBalance #3440, 35" metal long, 9/16"W, 7/8"D. Thanks, Fernando

I have Florida Extruded windows in Bellini of Miromar Lakes. Balance stamp is 22E. Length 23". I confirmed top is 19-005 and believe bottom is 15-005 but the actual measurement is 7/8ths, not 1". No photos for this question. 1. Do you sell these screen spacers Approx large leg 3/8", next mea ... (cont.)

Looks like I have 19-005 Balance Top with 15-029 balance shoe. Looking for non-tilt 1/2" channel balance assemblies. Also need sash stop and clip on side of windo.

i need replacement with this channel balance wich one should i order

I please help us find replacement parts. The window sash is approx 51 wide by 28 high the numbers on the channel balance are 25-9 AA CMC 7 Also 61-259

My existing channel length is 28 inches, 1/2 inch wide ans has 2730 BSI DL stamped. Need to find a replacement for it. Let me know what is your replacement part number.

I need 2 replacement window channel balances Stamp on current atrium window 34-4 AA CMC 4 Length 33" Shoes 5/8" & 1 1/4" Can you tell me which one I need to purchase please and thank you ?

Part #2930 stamped on housing.

Just want to order the right replacement parts. Balance length appears to be 26-1/2 inches and has markings saying 26 and another saying 4 bsi PB. It appears that the 26" Series 385 Channel Balance most closely resembles the current ones.

Hello, Trying to order the correct channel balance to replace a broken one. I believe S385-27 option: 2630 may be correct but not sure about the balance top that is included. The 19-005 top that is included visually does not look the same the top on the broken channel I have (please see attached p ... (cont.)

Looking for a replacement for the 29 inch lenght - 10/16 inch width channel balance for non-tilt window Length:29 inches Width: 10/16 inch Markings: 28 3 DW CMC 10

I need to identify and replace this balance. Channel length is 29" inches.

PGT SINGLE HUNG BALANCERS NEEDED #6SHSTKR INKED ON BALANCE: 23-2 DW CMC 4 THANKS VERY MUCH, BOB

The metal channel measures 27". The stamp found on the hardware is 2630.

Hi, one of the channel balances broke on our builder grade windows (one of the pulleys inside the spring failed and the string is now stuck). The guides have wings and the length of the metal portion only is 21". Attached are photos of the markings and the top guide. Which channel balances should I ... (cont.)

I would like to make a custom order channel balance with the below specification. Channel length : 9 Inch Channel width : 1/2 Inch Channel number : A830 shoe width : 9/10 Inch show length : 1 inch PFA the channel photos. Please let me know if anything else is required.

I have a 2230 channel at 23", with a 19-005 top, and a 15-029 shoe. Please see attached pics

Stamp looks like "8 3 C O C A L D W E L L" on sidemetal part is 9" long and 1/2" wide need (2) of theseAlso need (2) 20 5 JR CALDWELL METAL IS 20" LONG AND 1/2" WIDE with the same hook and same style plastic ends as the 8-3please include shipping and eta with quotethanks,Ian

I only have a couple of damaged balances and the rest are missing from the windows all together. They are 29" long, and 9/16" wide. I have two windows that have the 2830 size, and 3 windows that have the 2820. Will you please help me determine what hardware I need to repair these windows? The wi ... (cont.)