Viewing all customer Discussions for:

S380-16 16" Series 380 Channel Balance

Length of metal portion of channel is 16", 1/2" wide, 5/8" channel depth. Top nylon guide is 1-1/4" in length, 1-1/8" wide at tabs Bottom nylon guide is 1-1/14" in in length, 1-1/8" wide at tabs Overall length of balance is 17". I also need the accompanying sash guides, but all are broken with no w ... (cont.)

I have several sizes of the same brand. This one says21 2 BSI na

Hi,My sash has ink stamp "16-4 KX CMC 9"Please advise me as to the correct replacement in your catalog.I appreciate your help.Please stay safe in these troubling times,Regards,Joe

I am looking for replacement parts for 2 Window Channel Balances. 1/2" channel width 28" long Stamped with below info 2730 BSI CL 1/2" channel width 16" long Stamped with below info 1520 BSI JL

Need 4 window springs. 16" metal piece.

One is 22 inch long and the other is 16in long .

Hello,Could you please help me identify the correct part to order? Both the top guide and bottom shoe have wings. S377 looks to be the closest, although the top guide seems different.Thank you,Maile

16" long 1/2" wide. The sash is roughly 20"x18" single pane. The only markings I see are (15 2 EV CMC 2). Please help me find the correct replacement. I'd like to order two.KenThanks

Only different between these 2 parts is the bottom and it's a 3/32 different. I think my part is the 385 series. If I'm not sure, should I error on the smaller size and choose the 380 or error on the larger size and choose 385 ? Lastly, the 16 inch balance, what is the normal weight support ? I ... (cont.)

Need to replace qty.2 channel balance. They measure end to end metal only "16. Please let me if there is a replacement part for this size. Thank you, Oscar

Hello, I need to replace a couple sets of channel balances and am hoping you can help me hone in on the correct parts. The first 4 pictures starting with the one stamped with a "30" on it are all from the same channel balance. The metal part of the sash is 31 inches. The last picture with the "15" ... (cont.)

Hi, I have a 380 series balance that needs replacing (it definitely has a 15-005 shoe). The metal length is 15 3/4", and the stamp is 15 - 3 BSI RE. What would you recommend? Thanks Greg

I have a window balance that has failed and I need a replacement. It is 1/2" wide, 17" overall length. It is out of a Phillips window and the marking are 15 4 LR CALDWELL. Thanks for your help. John Davis

I have a 16" Series Channel Balance stamped 1540Z. Will the 380 Channel Balance work?

I have Milgard windows and need new balances. The old ones have an ink stamp that reads 14 2 DT CMC 2. They are 16 inches long and it looks like the 19-005 top matches along with 15-005 shoe. Which balance would work? Thank you, Curt

I don't see any stamp on the Channel Balance with Shoes. which option should I go for? length measure is 25 3/4". should I buy 25" or 26" Channel Balance with Shoes? please advise.

So my window just fell out of its tracks... And since the balances are broken at the plastic clips, I'm assuming that must be the reason? I do see 1540 printed on the balance, but I can't tell what "series" that equates to. While other companies have 1540s readily available, they don't really say ... (cont.)

Hello: Does the hook in the channel ballance just hook into the oval hols in my window sash or so I need attach some type of plastic hook on my sash to catch the chennel ballance? Right now, my sash only has a slanted part at the very top (veritcal slide) and an oval hold near the bottom (on both ... (cont.)

I have a 16" balance with "15D" stamped on the side followed by a stamp (in a vertical orientation) that looks like B.S.I. Will one of the options listed work for me. Thank you.

I have a 16" series 380 balance with stamp "1540X" and a 28" Series 380 balance with stamp "2730Z". Are the replacements simply "1540" and "2730" respectively?