Viewing all customer Discussions for:

19-029 Short S-Clip

Need 4 each of these

I'm looking for a video to replace my tension bar I have a double tilt weather shield window

Do you have a replacement for this channel balance?ThanksTom

I need jams liner for about 8 windows.I would also like new cables and springs.G1 (2 sets) 25'' Spring, 54'' Jam liner, NVS 24 R, white knifeG2 (1 set) 25'' Spring, 54'' Jam liner, NVS 24 HD, black knifeG4 (2 sets) 31'' Spring, 66'' Jam liner, NOO 30 TG, blue knifeG6 (1 set) 31'' Spring, 66'' Jam li ... (cont.)

Please help identify pet and where I can buy. Can I also source the Vimeo inserts? 24 inches code on balance is 24hdb

Hi, photo is of the end that attaches to shoe and the clip that holds the at the top plus the model # on the channel.I don't need the shoe or the top clip since I can reuse both. I need a strung channel with the right or no end so I can tie mine on or a couple of riveted channels and a roll of prope ... (cont.)

Hi, our old window balance mechanism broke down, looks like the big black spring hook is broken off. I can't seem to find a replacement on your parts. I'll attach photos. Please let me know if you have a replacement for it and do I need to change all four or just two would work ? ... (cont.)

I'm looking for find a replacement for this

I need 4 window balancers to fit Harvey window

Hooked end The length of the metal channel is 28 inches The width is 1/2 inch The number stamped on back of channel is2750 BSI

Can you help me look for this balance? It is 34 1/4" long

I have Weather Shield double hung windows that tilt in. I need to find a pair of channel balances with shoes that need to be replaced. I have attached pictures of the existing channels and the foot that is on the window itself. They have the ribbed channels, but don't slide into the trim. They att ... (cont.)

Do you have balance assemblies for 2002 Windsor double Hungs? The balance assembly is 29" long.

There's a number 14 C on it I don't know but the house like this I would need two of these for the windows whatever parts I need please let me know pay for them. You guys can send them out. Thank you.

The windows weigh about 30 Lbs The Blue base is approx 1 1/4 will I also need new window pins? Thanks

Hello,I've recently replaced the bottom part of my window.I noticed the new window is way more heavier than the old one. A new tempered glass was installed.The existing channel balances were not in a working condition previously.The old window didn't work for a long period of time because I think th ... (cont.)

Looking to replace these. 1/2 in thick 23in long. The pivot shoes were old and stuck closed

2365 HT 24in length

I am in need of replacement block and tackle window balances for a few windows in my recently purchased house. Unfortunately, I am unsure of the window manufacturer. The channel length is 29", with a width and depth of 1/2". The part number on the balance is 03/10 Unique 28-A-10. Any assistance woul ... (cont.)

The 26D series 770 matches except the top. Can the plastic piece at the top of the 770 series be easily removed? If yes, I can replace the plastic anchor with the hanging in from the old balance.