Viewing all customer Discussions for:

S500-23 23" Series 500 Spiral Balance

House was built in 1950 and some of the double hung windows need help operating. Need some spiral lift/balance system replacement parts.

I have a few windows that havent been replaced and they do not stay up. There are two which i have pictured by approximate width and height. (they do not come out, or at least i dont know how to get them out. The part that attaches to base of window, i dont recognize on any of your pictures. I'm loo ... (cont.)

Hi, I have (8) spiral balance(s) that measure 31 5/8" and (4) that measure 23 7/16". They all have a red cap at the end. They all had a plastic sleeve which was cracked and.fell apart. I measured the balance tube as instructed. What size should I order?

It's seems to be a 23" spiral balance. 5/8 diameter. White tip. The end of the spiral seems to be damaged. No shoe or bracket anywhere in the window frame nor near window.

Hi, Looking for a 5/8" diameter x 23" long spiral balances. The tip color is white but not sure that it was the correct balance. The sash weight is 18 lbs. Photo shows the clip. Thanks

The old balance had no clip. It's 23" long and 5/8" wide. On this non tilt window. The last photo looks up the sliding window. I need 2 balances and clips

5/8" x 23" for a 12lb non-tilt sash . . I need 4 . . . .

Hi, I am trying to replace my old spiral tube window balances. This house was built in the 50s and it seems like these are still the original windows. Surprisingly enough the windows are in good shape just need some updating. There are no markings on the units. They are 23"long, 3/8 wide. The sa ... (cont.)

I am trying to find these old "spiral" style balances for 1950's wood windows. They do not function like a spiral balance though. The square end push's in about ½" and you can wind it up and it will unwind. It does not pull out. Can you please let me know if you have ever seen something li ... (cont.)

The Window Balance tube is 23" long, 5/8" wide. The tube tip appears to be white.

Hi. These are the balancers we need to replace. The first photo shows the top w/ a hole. A nail was placed thru this hole into the window jamb. The 2nd photo shows the bottom connection to the window. The remaining silver piece in the 1st photo was the remains of the plastic tube. That measured 2 ... (cont.)

HiPlease let me know if you have something that can replace this.From 1940 timeframe 23 inches long 9/16 wideWindow weighs 9lbsThis balance attached to bottom of window but I am open to trying a different window attachment Thanks, Bruce

The windows (two) are from a 1870's house. Not sure if they are the original, probably not. Window Size - 24"Hx27.75"W Bottom SashWeight - 8 lbsOriginal Balance is 5/8 Dia (nominal). Length is 23.25, see photos.The bottom of balance is different then what's shown on website. Hoping they can be adapt ... (cont.)

Hi, I'm replacing the springs in my condo. Just took a few out but they're so old that the color is faded. Measured it and it's 5/8 by 23 inches. I was thinking of going with red and I would rather not remove the window to weigh it. It's non tilt by the way. Let me know if red would be fine. See pi ... (cont.)

I cant find this on your site

I need to replace window balancers in old wooden windows. Not sure if you would have replacements. I thought they went up through the top of the frame but I could be mistaken.

I need to replace spiral balances on al old window. The tube is 5/8" in diameter and 23" long but the inner spiral is 24.5". Space above the window sash is 23.4 inches and I thinks I can safely install a a 24" balance. Do you think that will work?

House built in 1950. Sash spring 5/8" thick. Attached to bottom of window with a 3" bracket, two screws.

Length is 24 inches I need 6 pieces please let me know if you have them in stock thank youlooking forward to hear from you

Need the springs and the brackets that attach to the bottom of the window. Can you help?