Viewing all customer Discussions for:

S900-28 28" Series 900 Spiral Balance

My window is approx. 37-1/2" wide x 58" tall . Single pane Fold out. No color on old bearing. Plastic tube 3/8". 28" length. What weight should I order? Ed

Hello, I am trying to find a replacement spiral balance for my tilt-in windows. They appear to be an S900-28, but the tip looks like a black plastic piece. On your website the only options are for green, red, and yellow. Can you use the yellow tip ones? I have included 3 picture. Here are ad ... (cont.)

Dear Sir I believe I have Croft series 96 tilt single hung windows, please correct me if I am wrong. I would like to replace both slides on each side of the window frame that the window sash fits into. These slides also attach to some type of spring device to help in the sash position. I w ... (cont.)

I replaced the spiral balances for four windows with Series 900 spiral balances. I used the special tool to wind them. One of the windows falls a bit now if opened all the way but was fine when I first installed it about a month ago. Do I just need to turn it one or two more times? or could it b ... (cont.)

I am looking for the pivot shoe and the spiral balance to fit the old 1992 Pacific Industries tilt window. This is the narrow size cam and thin spiral balance. Thanks

I need some help in ordering two spiral balances. The tip color on my balance is yellow but I did not see that as a choose. I have attached a picture for your reference. I cut the plastic away to expose the tip. The length is 28" and the diameter is 3/8". There is a stamped number on the tip "0 ... (cont.)

The balance is 28" long and 3/8 diameter The plastic pivot shoe is 7/8 wide and 1/2inch thick and inside diameter is 3/4 inch I have five vinyl clad windows and need 5 sets. One lumber supply company thinks these are Croft windows. The track home was build in 2003.

I have a spiral balance that is 28" in length by 3/8" in diameter. It has a red tip and the spring end has two 1/8 diameter roll pins that are separated by a measurement of 1/2" center to center. Each roll pin is 1/4" in length and is attached through the end of the spiral balance. I need th ... (cont.)

Can you assist me in determining the correct replacement part? My originals measured 28.5" for the outer sleeve, 27 and 3/8" for the coil and between the posts. I have included pictures to explain. Thank you for your time.

These are metal frame windows. I need a pair of sash balances. Do you have a video on how to install them?

Hello, We have some window sash springs broken and would like to replace them. Those are 29" long and 3/8" width.Brand for the windows is ALCOA 2092 which was installed in 1992. I can't find the series. Pl. help finding the right part. We need them asap. Thanks much!

your prices are great! I have a 28 inch tilt window spiral tube balance....four need to be replaced...when I try to get the window out and twist it doesn't come. It looks like a horizontal shaft going thru bottom of window with ends seated into female shaft mechanism below where balance slides in... ... (cont.)

The tube is 28" long and 3/8" wide. There is NO colored plastic tip to identify. I DID take the tube out of the window frame before I took this picture. I also pasted a copy, from my cart, of the 2 latches I want to order. I've already set up an account, using this email address. Which tub ... (cont.)

My spiral balances have tube construction on top and spiral spring construction on lower half. Both are covered in in white plastic cover tube. Length measures 28 1/2 inch. Tip color is blue. Original sash weighed 25 #. New replacement windows installed weigh 30#. OD of tube is 3/8 ". I ... (cont.)

I have a home approximately 10 years old that needs replacement sash springs. The windows were manufactured by Alcoa. The springs are exposed as the plastic covering has disintegrated due to sun exposure. The diameter of the springs is 3/8". One of the spring lengths is 35" but the tip color doesn't ... (cont.)

I have a 22.5 lb window sash for a single hung tilt window. The tube lenght is 28" and the current color is red. Should I upgrade to a green tip?

I need help identifying the color tip for a replacement spiral balance. I have an atrium tilt window. I have measured the length at 28" and width at 3/8". However, the color tip is hard to tell. I could guess and say its yellow, but I want to make sure before I ordered.

Thanks for posting! When measuring your length, make sure to only measure the tube--do not count the tip and the spiral protrusion in your measurements. If your balance still comes out to be 28-1/4", then we do recommend that you go with an even 28" length.

Window 1 (30" x 21.5") - balancer is 28" long, has a white tip, window weighs 13 pounds Window 2 (30" x 33.5") - balancer is 28" long, has a white tip, window weighs 19 pounds Window 3 (30" x 42.0") - balancer is 28" long, has a white tip, window weighs 23 pounds What are the correct ... (cont.)

I have a Ryland Home built in 1995 with Rollyson 8200 vinyl windows with a fixed upper sash and a tilt in lower sash for easy cleaning. The Rollyson company from South Point, Ohio 456680 is out of business. These windows have been very hard to open from day one seventeen year ago. I wond ... (cont.)