Viewing all customer Discussions for:

S795-32 32" Series 795 Channel Balance

I have included additional photos. I measured the metal channel end to end, excluding the end pieces and it is 32". It is marked 32C BS1. From what I see from the picture of the top piece of the S795-32, it is a metal piece that needs to be screwed in. As, hopefully you can see, mine is a clip th ... (cont.)

Need help finding a replacement window balance. The current balance is damaged beyond repair. According to the sticker on the window it is a Cornerstone/Heritage Single Hung NFRC-HGB-K-15 window. As you can see in the pictures provided the stamp on the metal portion of the balance reads: 32C HK5 ... (cont.)

Looking to find these white/cream balancer string clip retainers. On a vinyl tilt single hung from a 20yr old track home. Upper rod is 1/4".

The reason I am ordering is because current balances are not strong enough and sashes are slightly slipping down when opening. I will need to replace with the next size from 32-B to 32 C and from 20 C to 20 D balances.

Looking for this part please

Please help me identify this balance and shoe - It is 32" F without the shoe and the shoe is 1 1/4 " wide. I will need (2) right and (2) left hand balances and shoes

No evidence I could find that the original manufacturer is still in business, though I would guess the windows (original construction) are only about 15 years old. Multiple balances have broken (the plastic pulley cracked) and need replacing to make the windows functional. The metal channel is sta ... (cont.)

The 15-195 1-1/4" T-Lock balance shoes with closed cam that I ordered for my Series 795 32B channel balances will not fit. It appears to be because the end of the channel balance has a concave taper at the bottom end, as shown in the attached picture. Is there any other balance shoe that fits this c ... (cont.)

I need to place a custom order for 4 32E stamped balances (S795 with 15-195 closed cam on the bottom). However; on the top I need a balance clip attachment (15-198) on each of them. Thank you

Only identification on the window is NAMI NFRC 100/200 It looks like S795, I have a hook at the top like 15-198 balance clip. Shoe is closed 1 1/4" Length is 32" 32C marking on the balance pivot bar looks like 26-021 I need 2 of the channel balances with hook and shoe

I need a replacement balance for a Jeld-Wen tilting vinyl window. The old balance has 32D BSI stamped on the square channel. According to an instructional Jeld-Wen video on how to install a balance, this is a Type C balance. So can you provide me with a 32" Type C balance to fit a 4'x6' Jeld-Wen ... (cont.)

Hello, I am in need of replacing my channel balance after the cord snapped. I am having trouble locating the exact correct parts. I know my balance is stamped 32D J0 on the back and is not ribbed. It measures 32" without any clips attached. From shopping on your site it seems the Series 795 is wh ... (cont.)

Stamped on side is 32D in photo 3 picture.

Needed 28in. Inverted b and t with closed 1 14 pivot lock has a B stamped and the pivot has blue need 2 also a two 32 -G

Only making is "32B". "BSI"

only markings on balance BSIN. 32B May need associated guide/sash pin holder Manufacturer

I also have channel balance 34A 108E on it with same hook as the 28B pictured above. Also have 32B with no other markings that need to be replaced with the same hook as well. I ordered and received 15-194 1" balance shoes with closed cam that I need more of. all the cams I am replacing are open cams ... (cont.)

Channel is 32' in length Seeking a pair

I have a window balance that snapped where the spring attaches to the pulley at the top. Photo one shows a good balance (has a balance show attached) from the same window along side the broken one. The metal is stamped 32 5 (photo two). I need to replace the balance. Will probably buy a few. ... (cont.)

I need 2 window balances. The numbers found on existing balance: 32D - BSI - RJ Patent 4610108 on round end piece of hardware Has a metal hook on end of string.