Viewing all customer Discussions for:

S795-34 34" Series 795 Channel Balance

Looking for 4 channel balances and 4 T shoes The width of the T shoe is 1" The string at the top of the channel is secured with a screw at the top of the window casing

34B B.S.I.are the markings on the part.

Good Morning, I would like to order (6) of the S795-34 channel balances stamped with a 34C with a 15-198 top hook attached. Please let me know if you need any other information.

I need two Series 795 channel balancs, 34C, with 1" t-lock balance shoes/closed cam(15-194), and the hook(15-198)

My window balance has 2 broken parts, the cord and the lower pin to hold the spring hook. I need to replace the whole balance, but not sure the part number. The metal length: 34 inches and there is marking on metal: 34C 0B 8S1. It may be 34" series 795 channel balance from your catalog. Can you ... (cont.)

Hello I need to replace 8 of these in a home I bought. Could you help me match them up. They are 34 inches long in a non tilt window.

I have a balance spring that is almost a Series 795 34D but where yours has a tab with a hole mine has a "V" clip that attaches to a hole in the frame. See photo. Do you supply with a "V" clip?

Hi- I recently ordered several 34" channel balances and 1" shoes. When it came I realized I need hooks to attach the balance not the screw in that was shipped. Do you have the same balance with a 1" shoe and hooks? The ones I ordered also came with 1.25" shoes but I ordered 1" as I didn't realize th ... (cont.)

I think I need two (2) Series 795 channel balances ? 34" long and "B" stamp option as my sash weighs approximately 21 lbs. However, I need clip on top rather than screw on. I have attached pictures that show what I presently have. I think it looks like the 1-1/4 T-lock, closed cam. Can you plea ... (cont.)

It is 34 inches long

Hello, I need some help repairing my window. I think I've narrowed them down to MW manufacturing out of Virginia. I saw the video about upgrading to what looks like the type of hardware I already have. Series 795? I have several broken pieces on both sides so maybe just 2 complete assembly would be ... (cont.)

Looking to replace both balances. The metal stamping is as pictured. Will the 34 series channel balance work? Thank you in advance!

I will like to buy 66 pieces of T-Lock Balance Shoe. Please let me know if you have the size I need to replace them.

We have a customer with a MW window size 3/0 6/2 single hung vinyl window made in 2003 we are trying to locate new balances for them, they are the block and tackle style. We will need 6 total balances to do 3 windows the same size. Any help will be greatly appreciated. thank you

18 windows

Need replacement inverted block & tackle balance for upper sash tilt-out window. Marking on metal channel is 34B PD BSI. Channel is 34 inches long. Sash cord is white and screws into the top of the frame. The T-lock shoe is 1-1/4". The T-lock cam is open.

Hello. I need a replacement channel balance for a 34 inch balance. The only markings on it are "34B BSI". Thank you.

34 inches long. Atrium window.manufacturer. Installed 2007

I need 3 balances. The damaged one has "swisco" and "34B" stamped on it. The window is 72 inches high. The balance appears to me to be a series 795 (my guess), but with a cable and hook on the end instead of what is shown on the series 795 picture on your web site. The balance is mounted with a ... (cont.)

On one side of my window the string broke on the balancer. i pulled it from the tilt window and it shows number BSI 34c stamped on the metal.