Viewing all customer Discussions for:

S795-34 34" Series 795 Channel Balance

All the plastic B&T accessories are breaking. Windows are in great shape otherwise.

I am not sure what to order. Please see pictures

I am seeking for instructions on how to add a hook onto a channel balance.

Hi,Our windows were new in 2008 (manufacturer unknown) and many of the channel shoes have broken at the end that hooks into the channel track. It looked like your 15-194 channel shoe would work but it just doesn't quite fit. The channel balances all seem in good condition (no rust, cords all seem ... (cont.)

Moss brand window installed in 2006. Clips holding spring in metal channel broke. Marking on channel has 34S. Pictures attached for reference. Any help/suggestions greatly appreciated!

Property Manager, looking for part for windows, side rails, bottom locking pins, and top thumb locking assembly.

Recently I purchased 795S balances and unfortunately, they don't fit my windows. I have attached a picture of the balance that I removed from one of my windows so that you can guide me ordering the correct part(s). My contact information is below:John Thank you for your assistance. ... (cont.)

I am in need of pella window balances they are labeled 34b on back. They are 34 inches long with a string tackle set up. They have claw clip on one and a tilt mechanism on other end.

Please provide a custom quote for this configuration. Top is a hook-type and the length is 34D. Thanks, Rashid

I had originally ordered 4 window balancers but the top was wrong and the bottom stops were too big for the channel. The first ones were 34" Series 795 Channel Balancers(S795-34) the pictures I am sending you are of the ones I need. They are 34B but slimmer channels. I would like to order 4 again. ... (cont.)

I need 2 of these. thank you

What do I need to order for replacements and the latch on the spring fits in a hole drilled in the sash.

Please find attached pictures of the parts that I need to replace.The parts that I ordered were completely different from what I needed.Home building completed October 2007 in Columbia, Tennessee Balance Spec:Tilt Windows Stamp on my Balance Frame: 34B BSI THMy broken balance measurements are exac ... (cont.)

I have checked numerous windows in my house and I have come to the conclusion that I need the following parts to replace my broken ones 26-243 Left Latch (x7) 26-244 Right Latch (x7) 26-360 Pivot Bar (x4) 15-194 Balance Shoe (x24) S795-34C Window Balance (x2) but I am going to need the 15-194 balan ... (cont.)

Which model will fit the channel with the above balance? please help me to identify the model ?

Hello, Hello. I need a replacement channel balance for a 34 inch balance. The only markings on it are "34B BSI". Thank you.

Hi Folks.....this is a picture of a model S-795 balancer that belongs on a Jeld Wen single hung window. The customer was tilting the window in to wash it and the balancer blew out, the metal channel kinked and parts went flying every where. Regardless of what they did to it, I need to get it replace ... (cont.)

Numbers on one window are 32 C and D (two rods per side) the other window 34 C and D (two rods per side)

Hi there!Trying to get an identifier on the shoe for a BSI Inverted Block and Tackle Balance.The labeling on the channel is 34C BSI, the channel length is 34". Got the top clip identified as 34, but I am struggling with the bottom shoe. Uploaded some pictures, hopefully you will be able to help!Than ... (cont.)

34 C on metal support. Where can you buy replacement?